Cost Guides · 2026

How Much Does a New Roof Cost in 2026?

A new roof costs about $14,000–$18,500 in 2026 for a typical home. See itemized costs to replace a roof by material, size and state, plus how to check a quote.

$14,000–$18,500

Short answer

A new roof costs about $14,000–$18,500 in 2026 for a typical home. See itemized costs to replace a roof by material, size and state, plus how to check a quote.

Cost to replace a roof: quick answer

A new roof price depends on the measured roof, material system, tear-off scope, labor market, and details. TheRoofBill’s worked example is $11,800–$15,700 for a one-story 2,000-square-foot footprint in Texas, medium pitch, simple gable, architectural shingles, one layer removed, and the model’s permit and decking assumptions. This is an illustrative scenario, not a national average or a quote. For how the price scales with home size and story count, see roof replacement cost by house size; for the labor portion alone, see roofing labor cost per square.

The short answer

For your own budget, use roof-surface area and specify material, pitch, shape, state, tear-off, and accessories. Then compare written bids with matching scope. A calculator is a starting point, not a substitute for an inspection.

Calculator

Roof cost calculator

Preset to the national labor baseline and a 2,000 sq ft home (2,240 sq ft of roof). Change any input for an itemized 2026 estimate. The link in your address bar saves your inputs.

01

Material

Model rate: $5.21–$6.82 per roof sq ft installed.

02

Roof area

Area unit

Roof surface, not floor area. One roofing square = 100 sq ft. 2,240 sq ft = 22.4 squares.

03

Roof pitch

Steeper roofs take more labor and safety setup.

04

Complexity

05

Stories

06

Old layers to tear off

Tear-off: $39–$53 per square per layer.

07

Location

State labor factor from BLS roofer wages. ZIP is optional and never stored.

+

Extras (optional)

Itemized planning estimate

Your roof bill

National baseline · 2,240 sq ft roof

Planning estimate
Materials & installation2,240 sq ft × $5.21–$6.82 × 1.00 adjustments$11,670–$15,280
Tear-off22.4 squares × $39–$53 × 1 layer$870–$1,190
Permits & disposalModel default, scaled to 1.6× at the high end$300–$480
Decking contingency10% of base, for damaged decking found mid-job$1,160–$1,530

Estimated installed total · Architectural Asphalt Shingles

$14.0k–$18.5k
Low$14,000
Typical (midpoint)$16,200
High$18,500

$630–$820 per roofing square, all in. Planning life 25–30 years.

Not included: gutters and structural repairs beyond decking.

Planning estimate only, not a contractor quote. Actual cost depends on roof condition, local requirements, and the work included.

What national averages say, and why they disagree

Search "roof replacement cost" and you'll find averages from under $10,000 to over $30,000. They aren't contradictory; they measure different jobs. Checked November 15, 2026:

SourceAverageTypical rangeWhat it describes
Angi (2026 data)$9,530$5,870–$13,223Homeowner-reported projects, all materials; Angi says the average home has 1,300–1,800 sq ft of roof
Fixr, roof replacement (2026 data)About $10,000$7,500–$14,000Typical projects; average $4.75 per sq ft
Fixr, asphalt shingle roof (updated Jan 21, 2026)$12,000$8,000–$16,000Asphalt shingle replacements only
TheRoofBill national baseline$14,000–$18,500 range—One-story 2,000 sq ft footprint (2,240 sq ft of roof), architectural shingles, one layer torn off, permits and 10% decking allowance
Verisk U.S. Roof Report (2025 figure, released May 29, 2026)$17,631—Drawn from property, claims and weather analytics; 33% above its 2021–2024 average
Cost vs. Value 2025$31,871—One defined asphalt-shingle roof replacement project, priced nationally

Three reasons the numbers spread out:

  1. Roof size. Angi's average home roof is 1,300–1,800 sq ft; our example has 2,240 sq ft. Price scales roughly with area, so a smaller roof lands lower. See roof replacement cost by house size.
  2. Scope. Some averages fold in tear-off, disposal, permits and decking; others don't say. Our example lists each line separately.
  3. Population. Verisk's figure comes from property and claims analytics, where roofs are often replaced after wind or hail; Cost vs. Value prices one specified project. Neither is "the" price of a typical reroof.

Before comparing any average with your quote, check the roof area and scope behind it.

TheRoofBill's itemized national example

The national baseline (labor factor 1.00) version of the worked example: one-story 2,000 sq ft footprint, medium pitch, simple gable, architectural shingles, one layer removed.

LineRange
Materials and installation (2,240 sq ft × $5.21–$6.82)$11,670–$15,277
Tear-off, one layer (22.4 squares × $39–$53)$874–$1,187
Permits and disposal$300–$480
Decking contingency (10% of installed line)$1,167–$1,528
TotalAbout $14,000–$18,500

That's roughly $625–$825 per roofing square all-in. The Texas version in the short answer is lower because the model's Texas labor factor is 0.83. Run your own state, pitch and material in the calculator, or follow the formula step by step in how to estimate roof replacement cost.

2026 material planning ranges

CoveringModel installed range per roof sq ft
3-tab asphalt shingles$4–$6
Architectural asphalt shingles$5.21–$6.82
Class 4 impact-resistant shingles$6.50–$9.50
Corrugated metal$5–$10
Standing seam metal$10–$16
Concrete / clay tile$10–$16 / $12–$18
Natural slate$15–$28
TPO / EPDM membrane$8.23–$10.54

These are model inputs per square foot of roof surface. For exact assumptions and exclusions, read our methodology.

Why the house size is not the roof size

A home’s listed square footage usually describes interior floor area. The roof covers a sloped surface and may include overhangs, porches, garages, dormers, and multiple roof planes. The site example estimates a 2,000-square-foot footprint at about 2,240 square feet of roof for its assumed pitch and geometry. Your roof can be larger or smaller. Ask bidders for the roof measurement and a sketch.

What a replacement bid should itemize

  1. Covering, underlayment, starter, ridge, and accessory products.
  2. Existing layers removed, disposal, and protection of the property.
  3. Flashing and transitions at walls, chimneys, skylights, valleys, and pipes.
  4. Ventilation changes and intake/exhaust details.
  5. Decking repair unit rates, with owner approval before additional work.
  6. Permit responsibility, cleanup, magnetic nail sweep, and final inspection.
  7. Manufacturer and workmanship warranty with exclusions and transfer terms.

If your roof has skylights, the bid should say whether each one is being reflashed or replaced. See skylight replacement cost for what replacing them adds.

Is a $30,000 roof quote too high?

There is no reliable yes-or-no answer from the total alone. First check that the quote states the measured roof area, pitch, material line, number of layers to remove, disposal, flashing, ventilation, decking rates, permits, cleanup, and warranties. A quote for a large, steep, complex roof or premium system is not directly comparable with a small, simple asphalt roof. Ask at least two contractors to price the same written scope; investigate both unusually low bids and large differences rather than relying on a single national average.

Does a new roof pay for itself at resale?

Not necessarily. The 2025 Cost vs. Value Report lists a national average job cost of $31,871 and resale value of $21,501 for its asphalt-shingle roof-replacement project, or about 68% of project cost recouped. That is a modeled national comparison for a defined project, not a promise of added value for an individual home. Market, roof condition, project scope, and timing affect resale; a necessary replacement may also address inspection concerns even when its full cost is not recovered. See the 2025 Cost vs. Value report for its project assumptions and local-market results.

A new roof on your primary home also adds to your cost basis for tax purposes. See is a new roof tax deductible for how that works, and for rentals and home offices.

When can a new roof go over the old one?

A roof recover may be allowed in some circumstances, but it is not a universal shortcut. The locally adopted code, existing covering, roof condition, structural load, and new product's installation instructions all matter. The International Residential Code roof-recover provisions are a model-code reference; jurisdictions may adopt different editions or amendments. Ask the local building department and an experienced roofer before comparing an overlay bid with a full tear-off. A recover can leave hidden deck damage undiscovered and can affect warranty or future removal costs.

To price removal on its own, or check whether an overlay is allowed on your house, use our roof tear off cost calculator.

Our guide to roofing over existing shingles covers the code limits and the overlay vs tear-off price on the same roof.

How to compare bids

Ask two or three licensed/qualified local roofers for written bids on the same assembly. Match the material model, measurement, tear-off layers, flashing, ventilation, and disposal. Check that the contractor carries required insurance and follows local permit rules. Read our contractor guides before signing.

For a personalized starting estimate, try the roof replacement cost calculator; then compare your results against on-site quotes. Browse the 2026 roof cost guides for material and size-specific breakdowns.

Sources and limits

Our installed ranges are 2026 planning estimates from the material model described in our methodology. National averages above were checked November 15, 2026 against Angi, Fixr, Verisk and the Cost vs. Value report as linked. We also compare Homewyse roofing installation cost data, Angi’s 2026 roof replacement guide, Fixr’s roof replacement guide, and BLS roofer wage data. These sources measure different scopes, so we use them as planning inputs, not as a single quote database or a guarantee. Check current local bids and the product manufacturer’s specifications before choosing a roof.

The next step

Get your number in 60 seconds.

Answer a few quick questions and get an itemized 2026 estimate for your roof. No email, no sales calls.

Open the Roof Cost Calculator →

Based on 2026 public cost data. See the methodology.

Frequently asked questions

How much does a new roof cost in 2026?

Published national averages range from about $9,530 (Angi, 2026 data) and $10,000 (Fixr) to $17,631 (Verisk's 2025 figure, drawn from property and claims analytics). TheRoofBill's national baseline example for a one-story 2,000 sq ft house with architectural shingles, tear-off, permits and a decking allowance is about $14,000–$18,500. Roof size, material, pitch and location explain most of the spread.

What is the average cost of roof replacement?

It depends on whose average and what it covers. Angi's 2026 national average is $9,530, with most homeowners paying $5,870–$13,223; Fixr's is about $10,000, with most jobs $7,500–$14,000, and $12,000 for asphalt shingle replacements specifically. These describe typical jobs, often on roofs smaller than 2,000 sq ft, so check the roof size behind any average before comparing it with your quote.

What is the biggest factor in roof replacement cost?

Roof surface area and chosen covering are major drivers, but pitch, roof shape, access, removal, flashing, decking, and local labor can move the bid substantially.

How do I get an accurate roof replacement estimate?

Get at least two detailed, written proposals based on a measured roof, the same material specification, and clearly listed tear-off, flashing, ventilation, permit, cleanup, deck-repair, and warranty terms.

Is $30,000 too much for a roof replacement?

The price alone cannot establish that. Roof area, material, pitch, access, tear-off, decking, flashing, ventilation, permits, and warranty all affect scope. Compare written bids for the same measured roof and product system, then ask each contractor to explain major differences.

Can you put a new roof over old shingles?

Sometimes a roof recover is allowed, but the answer depends on the existing roof, proposed covering, manufacturer instructions, structural condition, and locally adopted code. Have a qualified roofer inspect the roof and confirm requirements with the local building department; an overlay can conceal damaged decking.

How can I reduce the cost of a new roof?

Compare multiple bids for the same scope, ask for the exact product and included work, and separate required repairs from optional upgrades. Do not reduce cost by skipping necessary flashing, ventilation, tear-off, permits, or safe installation details.

Cost figures are planning estimates based on 2026 public data (Homewyse, Angi, Fixr, BLS). They are not contractor quotes. Full disclaimer · How we calculate.