How much does it cost to replace a 1,500 sq ft roof in 2026?
For a 1,500-square-foot house, TheRoofBill's worked example estimates about $8,900–$11,900 for architectural asphalt shingles. That is a transparent planning example, not a national quote: it assumes a one-story Texas home, simple gable roof, 6/12 pitch, and one existing layer to remove. Every input is shown below so you can compare it with contractor bids.
The key detail: 1,500 sq ft of house is not necessarily 1,500 sq ft of roof. A sloped roof has more surface area than its footprint, and overhangs, dormers, valleys, and additions can push it higher still.
The short answer
Plan around $8,900–$11,900 for the specific asphalt-shingle example in this guide. Use the roof replacement cost calculator with your state, material, pitch, and roof shape for a more relevant starting range.
What the estimate includes
Here is the calculation for a 1,500 sq ft footprint with a medium-pitch, simple-gable roof in Texas. These are the same published inputs used in our cost methodology:
| Estimate item | Calculation | Example range |
|---|---|---|
| Roof surface area | 1,500 sq ft footprint × 1.12 slope factor | About 1,680 sq ft |
| Architectural asphalt installation | 1,680 sq ft × $5.21–$6.82/sq ft × 0.83 Texas labor factor | About $7,260–$9,510 |
| One-layer tear-off | 16.8 roofing squares × $39–$53 per square | About $655–$890 |
| Permits and disposal allowance | Model allowance | $300–$480 |
| Decking contingency | 10% of base installation | About $730–$950 |
| Estimated total | Sum of the listed items | About $8,900–$11,900 |
The inputs are estimates from the model, not a promise that a local roofer will charge these prices. The state factor is a wage-based estimate applied to the whole materials-and-installation line, not a local price survey; permits and disposal vary by municipality, and damaged decking beyond the contingency can add cost. Gutters, structural framing repairs, and financing are not included.
Why 1,500 square feet of house can mean more roof
House size usually refers to interior floor area or building footprint. Roofing is priced on the actual sloped surface. In this example, the model uses a 1.12 slope factor for a 6/12 pitch, turning a 1,500 sq ft footprint into roughly 1,680 sq ft of roof surface. That equals 16.8 roofing squares before material waste; one roofing square is 100 sq ft.
The roof can be larger still if the home has wide eaves, multiple wings, dormers, or many valleys. A two-story 1,500 sq ft home may have a smaller footprint than a one-story home of the same interior area, so its roof can require less material. Ask your roofer for the measured roof area and pitch rather than relying on home square footage alone.
Example planning ranges by house footprint
The table below scales the same example assumptions across several one-story home footprints. It is a comparison aid, not a set of national averages or measured roof quotes. For two-story homes, other materials and both readings of "1,000 sq ft," see roof replacement cost by house size.
| One-story home footprint | Assumed roof area at 6/12 pitch | Example planning range |
|---|---|---|
| 1,000 sq ft | About 1,120 sq ft | $6,000–$8,100 |
| 1,200 sq ft | About 1,344 sq ft | $7,200–$9,600 |
| 1,500 sq ft | About 1,680 sq ft | $8,900–$11,900 |
| 2,000 sq ft | About 2,240 sq ft | $11,800–$15,700 |
| 2,500 sq ft | About 2,800 sq ft | $14,700–$19,400 |
Each row assumes a simple-gable roof, architectural asphalt shingles, Texas labor adjustment, one layer removed, a 10% decking contingency, and the model's permit/disposal allowance. The roof-area estimate uses the model's 1.12 slope factor; it does not add overhangs, roof waste, extra stories, dormers, or other add-ons. Change the location, roof shape, pitch, material, or tear-off assumptions in the calculator before using a figure for planning.
A 1,500 sq ft house by state, material and story count
The worked example above uses Texas. Here is the same one-story 1,500 sq ft footprint (about 1,680 sq ft of roof) with architectural shingles in other states, using the model's wage-based labor factors:
| State (model labor factor) | Estimate |
|---|---|
| National baseline (1.00) | $10,600–$14,000 |
| Arizona (0.85) | $9,100–$12,100 |
| Georgia (0.85) | $9,100–$12,100 |
| Florida (0.86) | $9,200–$12,200 |
| North Carolina (0.88) | $9,400–$12,500 |
| Ohio (0.89) | $9,500–$12,600 |
| Colorado (0.93) | $9,900–$13,100 |
| Pennsylvania (1.01) | $10,700–$14,100 |
| Washington (1.09) | $11,400–$15,100 |
| California (1.15) | $12,000–$15,900 |
| New York (1.19) | $12,400–$16,400 |
And at the national baseline, by material and layout:
| Option for a 1,500 sq ft house | Estimate |
|---|---|
| 3-tab shingles, one story | $8,300–$12,500 |
| Architectural shingles, one story | $10,600–$14,000 |
| Architectural shingles, hip roof instead of gable | $11,700–$15,500 |
| Architectural shingles, two stories (750 sq ft footprint) | $5,700–$7,500 |
| Class 4 impact-resistant shingles, one story | $13,000–$18,900 |
| Standing seam metal, one story (shingles removed) | $19,400–$30,900 |
Labor factors are statewide estimates from BLS wage ratios, not local price surveys. A two-story 1,500 sq ft house has roughly half the roof of a one-story house the same size, which is why its estimate is so much lower. Totals are rounded to the nearest $100.
What other 2026 guides report
Cost guides don't all measure the same thing, so treat their figures as context, not as a direct comparison with a quote for your house. Checked November 16, 2026:
- Angi's 2026 roof replacement guide gives a national average of $9,530, with most homeowners paying $5,870–$13,223, and says the average home has 1,300–1,800 sq ft of roof, so a one-story 1,500 sq ft house is close to Angi's typical job. Its $4–$11 per sq ft range covers all materials; applied to 1,680 sq ft of roof that's about $6,700–$18,500.
- Fixr's 2026 roof replacement guide gives an average of about $10,000 and a typical range of $7,500–$14,000, at an average of $4.75 per sq ft ($3.75–$11).
A source's "1,500 sq ft roof" means 1,500 sq ft of roof surface, not a 1,500 sq ft house, which is usually more roof.
What changes the cost most?
- Roofing material: Architectural asphalt is the basis for our example. Three-tab shingles cost less per square; metal, tile, and slate cost substantially more. Compare material ranges in the calculator and in our asphalt shingle cost guide.
- Pitch and shape: Steeper roofs take longer and require more safety setup. Hips, dormers, and valleys add cuts and complexity compared with a plain gable.
- Location: Labor and permit costs vary. Our example uses Texas's 0.83 labor factor; it is not a national average and should not be applied to another state. See cost per square foot for how local rates move the math.
- Existing roof layers: The example removes one asphalt layer. A second layer or a heavier existing material adds tear-off and disposal work.
- Decking condition: Rot discovered after the old covering comes off can require replacement. The model includes a 10% contingency for decking, but severe damage can exceed it.
- Access and height: Multi-story homes, limited staging space, and difficult driveway access can affect labor and debris handling.
How to compare roofing bids
Request at least two or three written estimates and check that each one uses the same scope. A useful bid states the measured roof area and pitch, material brand and product line, underlayment and flashing, number of layers removed, disposal, permit responsibility, decking price, ventilation work, and workmanship warranty. Ask whether the quoted total includes tax and cleanup.
If one bid is dramatically lower, find out whether it excludes tear-off, assumes no decking repairs, or uses a different shingle grade. Our roof repair vs. replacement guide can help you confirm a full replacement is the right scope before you compare prices, and how many roofing quotes to get explains why bid structure matters more than bid count.
Compare other projects and materials in our 2026 roof cost guides.
Sources: TheRoofBill 2026 cost model and methodology, with the state and material tables calculated November 16, 2026; Angi's 2026 roof replacement guide and Fixr's 2026 roof replacement guide, both checked November 16, 2026.
Frequently asked questions
How much does it cost to replace a roof on a 1,500 sq ft house in 2026?
TheRoofBill's worked example comes to roughly $8,900–$11,900 for a one-story home with a simple gable, medium-pitch architectural asphalt roof and one layer to remove. At the national baseline (labor factor 1.00) the same roof is about $10,600–$14,000. Angi's 2026 per-square-foot range of $4–$11 applied to the same 1,680 sq ft of roof gives a much wider $6,700–$18,500, because it blends every material. Your bids depend on measured roof area, not house size.
Is a 1,500 sq ft house the same as a 1,500 sq ft roof?
Usually not. House square footage describes the floor footprint, while the roof surface grows with slope, overhangs, and shape. In our example, a 1,500 sq ft footprint becomes about 1,680 sq ft of roof area at a 6/12 pitch, before waste or complexity. Ask the contractor for the measured roof area and pitch.
How many roofing squares are on a 1,500 sq ft house?
Using our example's 1,680 sq ft of roof area, that is about 16.8 roofing squares before waste. A roofing square covers 100 sq ft. The contractor's material order will be larger to cover cuts, valleys, starter strips, and the product's installation requirements.
What is the cheapest way to replace a 1,500 sq ft roof?
Three-tab asphalt shingles are generally the lowest-cost material in 2026 pricing guides, but the cheapest bid is not always the cheapest project. Compare written bids with identical scope — tear-off, underlayment, flashing, disposal, permits, decking terms, and warranty — because a low bid can exclude work the others include.
How long does it take to replace a 1,500 sq ft roof?
Many straightforward shingle replacements take a day or a few days of active work, but size, complexity, weather, permits and hidden repairs can stretch the schedule. Ask the roofer to separate permit and delivery time from installation days; our roof replacement timeline guide explains what drives the calendar.
Cost figures are planning estimates based on 2026 public data (Homewyse, Angi, Fixr, BLS). They are not contractor quotes. Full disclaimer · How we calculate.