Independent roof cost guide · 2026

Roof Replacement Cost Calculator

A clearer view of your next roof bill: itemized 2026 estimates by state, material and roof size.

01

Itemized by design

See materials, labor, tear-off, and permits separately.

02

Grounded in public data

Pricing sources are dated and explained in plain English.

03

No lead-generation tricks

We don’t sell your contact details to contractors.

Itemized planning estimate

Your roof bill

Texas · 2,240 sq ft roof

Planning estimate
Roof material
Roof pitch
Materials & installation2,240 sq ft × $5.21–$6.82 × 0.83 adjustments$9,680–$12,680
Tear-off22.4 squares × $39–$53 × 1 layer$870–$1,190
Permits & disposalTexas default, scaled to 1.6× at the high end$300–$480
Decking contingency10% of base, for damaged decking found mid-job$960–$1,270

Estimated installed total · Architectural Asphalt Shingles

$11.8k–$15.7k

Planning estimate only, not a contractor quote. Actual cost depends on roof condition, local requirements, and the work included.

How much does a roof replacement cost in 2026?

A typical roof replacement costs about $14,000–$18,500 on TheRoofBill’s 2026 national baseline: a one-story 2,000 sq ft footprint (2,240 sq ft of roof), architectural shingles, medium pitch, one layer torn off, permits and a 10% decking allowance.

Published national averages sit on either side of that, because they measure different roofs. Angi’s 2026 data puts the average at $9,530 (typical range $5,870–$13,223) and says the average home has 1,300–1,800 sq ft of roof. Fixr’s 2026 guide puts a typical replacement at about $10,000. Verisk’s U.S. Roof Report, released May 29, 2026, puts the 2025 average at $17,631. We checked those figures on November 15, 2026. The full new roof cost breakdown compares them side by side.

Your own number moves with four things: how much roof you have, what it’s made of, how steep and cut-up it is, and what roofers earn where you live. The calculator above changes each of those for you and itemizes the result.

Roof replacement cost by material

Installed price per square foot of roof area in our model, before tear-off, permits and the decking allowance:

MaterialInstalled cost per sq ft of roof
Asphalt shingles (3-tab to architectural)$4.00–$6.82
Metal (corrugated to standing seam)$5.00–$16.00
Tile (concrete and clay)$10.00–$18.00
Natural slate$15.00–$28.00
Flat roof (TPO / EPDM)$8.23–$10.54

Roof replacement cost by house size

National baseline, one story, architectural shingles, medium pitch, one layer torn off:

Home footprintRoof areaEstimated cost
1,500 sq ft1,680 sq ft$10,600–$14,000
2,000 sq ft2,240 sq ft$14,000–$18,500
2,500 sq ft2,800 sq ft$17,400–$23,000
3,000 sq ft3,360 sq ft$20,900–$27,500

Two-story homes have a smaller roof for the same living area. See roof replacement cost by house size for one- and two-story math.

Steeper or more complex roofs cost more than the table shows: the model raises labor for 7/12 pitches and above, and for hip roofs and roofs with dormers and valleys.

Roof replacement cost by state

Labor is the part of the bill that moves most from state to state. Our state factor is the BLS median hourly wage for roofers in that state divided by the national median ($26.65).

  • Lowest labor factors: Oklahoma 0.79×, Mississippi 0.81×, Alabama 0.82×, New Mexico 0.82×, Tennessee 0.82×.
  • Highest labor factors: Illinois 1.41×, New Jersey 1.38×, Minnesota 1.34×, Massachusetts 1.31×, Alaska 1.20×.

Compare all 50 states and DC on one standard roof in the Roof Replacement Cost Index.

Labor isn’t the only local difference. Permit fees, building code rules such as ice barrier or wind requirements, and storm demand after hail or hurricanes also vary, and our state factors don’t capture them. Our state guides cover those separately.

What’s included in a roof replacement quote

A complete quote should price each of these, or say clearly that it’s excluded:

  • Materials: the roofing product, with the manufacturer and product line named.
  • Labor: installation, which rises with pitch, roof complexity and stories.
  • Tear-off and disposal: removing each old layer, plus the dumpster or haul-away.
  • Underlayment: the layer under the roofing, including ice and water shield where needed.
  • Flashing: around chimneys, walls, valleys, vents and skylights.
  • Ventilation: ridge vents or other intake and exhaust work.
  • Permits: the local permit and any required inspection.
  • Decking contingency: a stated price for replacing damaged decking found after tear-off.

More calculators

Measuring before you price? The roof pitch calculator turns a rise and run or an angle into pitch, degrees and the roof-area multiplier. The roof shingle calculator counts squares, bundles, starter, ridge cap and underlayment. To turn an estimate into a monthly figure, use the roof payment calculator.

Roof cost questions

How much does it cost to replace a roof?

On our national baseline, replacing the roof on a one-story 2,000 sq ft home with architectural shingles costs about $14,000–$18,500 in 2026, including tear-off, permits and a 10% decking allowance. Smaller roofs and lower-wage states land lower; metal, tile, slate, steep pitches and high-wage states land higher. Enter your roof in the calculator for an itemized range.

How much does a new roof cost per square foot?

Installed material and labor runs about $5.21–$6.82 per square foot of roof area for architectural shingles in our 2026 model, $4–$6 for 3-tab, $10–$16 for standing seam metal and $15–$28 for natural slate. Tear-off, permits and decking come on top, so architectural shingles work out to about $625–$825 per roofing square all-in.

How is roof replacement cost calculated?

We multiply roof area (your footprint times a pitch factor) by the installed price per square foot for your material, then adjust for pitch, roof shape, stories and your state’s labor factor from BLS wage data. Tear-off, permits and disposal, and a 10% decking contingency are added as separate lines. The full formula is on our methodology page.

Why are roofing quotes so different?

Quotes often cover different work. One roofer may include tear-off, new underlayment, flashing, ventilation and a decking allowance; another may leave some out or price them as extras. Roof measurements, product lines, crew workload and warranty terms also vary. Compare bids line by line, using the same roof measurement and material spec, before deciding which one is high.

Does this roof cost calculator ask for my email?

No. There’s no sign-up and no lead form. You can run as many estimates as you like without giving a name, email or phone number, and nothing is passed to contractors. The ZIP code field is optional: it only suggests a state, and it isn’t stored.

How accurate is an online roof cost estimate?

It’s a planning range, not a quote. It shows roughly what a roof like yours should cost, so you can budget and spot outliers. A contractor’s quote follows an inspection, which can turn up rotted decking, extra layers or flashing work that changes the price. Use the estimate to check quotes, not to replace them.

A home with a charcoal shingle roof

Make your next decision

Start with what you need to know.

Browse all roof guides →

Want to know where every number comes from?

Read the methodology →