Use the standing seam calculator
Price your own roof by area, pitch, tear-off and state with our standing seam cost calculator. It shows low, typical and high totals with every line itemized.
2026 metal roof installation ranges
| System | Installed planning range per sq ft of roof area | Typical design question |
|---|---|---|
| Corrugated metal panels | $5–$10 | Exposed fasteners, panel profile, and maintenance plan |
| Standing seam | $10–$16 | Concealed clips, thermal movement, and panel details |
| Stone-coated steel | $8–$14 | Profile, coating warranty, and compatible accessories |
These are roof-surface square feet, not living-area square feet. A 2,000-square-foot house can have more than 2,000 square feet of roof because of slope, overhangs, porches, and roof shape. Get the measured roof area from each bidder.
The short answer
Metal roof estimate for a typical house
Most metal roofs replace an asphalt shingle roof, so this table uses the model's shingle tear-off rate ($39–$53 per square). National baseline (labor factor 1.00), one story, medium pitch, simple gable, one layer removed, the $300–$480 permit and disposal allowance and a 10% decking contingency:
| One-story house footprint | Roof area | Corrugated panels | Standing seam |
|---|---|---|---|
| 1,500 sq ft | About 1,680 sq ft | $10,200–$19,900 | $19,400–$30,900 |
| 2,000 sq ft | About 2,240 sq ft | $13,500–$26,300 | $25,800–$41,100 |
On the 2,000 sq ft house, the standing seam estimate breaks down as $22,400–$35,840 installed, $874–$1,187 shingle tear-off, $300–$480 permits and disposal, and a $2,240–$3,584 decking allowance. Removing an existing metal roof instead uses the model's metal tear-off rate ($50–$85 per square) and adds a few hundred dollars. For your own state and pitch, use the standing seam cost calculator.
What other 2026 guides report
| Source | Average | Range | Per square foot |
|---|---|---|---|
| Angi, steel roof cost (2026) | $19,000 | $16,000–$28,000 | Corrugated $6–$10; standing seam $12–$16 |
| Fixr, metal roof cost (2026 data) | $26,500 for a 2,400 sq ft steel roof | $14,400–$38,400 | Average $11; standing seam $7–$30 |
| TheRoofBill model | — | See table above | Corrugated $5–$10; standing seam $10–$16 |
Angi's standing seam range starts above ours, and Homewyse's calculator runs higher still (see sources below). Treat our metal figures as the lower end of planning and rely on local bids. Fixr adds that labor is 50% to 80% of a metal roof's total, about $3–$12 per square foot.
Resale context: the 2025 Cost vs. Value report prices its national metal roof replacement project at $51,865, with $25,972 (50.1%) recouped at resale, compared with 67.5% for its asphalt shingle project.
What changes the installed price
Standing seam and corrugated panels are not interchangeable products. A useful bid names the panel system and gauge, the metal and coating, the fastener or clip system, underlayment, edge metal, valleys, ridge details, and flashing at every penetration. Compare those specifications before comparing totals.
- Roof geometry: hips, valleys, dormers, and short panel runs add cutting and fitting.
- Tear-off: removing old shingles or an existing metal roof adds labor, disposal, and sometimes repairs.
- Deck condition: replacement sheets or boards are often priced separately after tear-off exposes the deck.
- Details: chimneys, skylights, eaves, valleys, gutters, and wall transitions need compatible metalwork.
- Access and pitch: steep or multi-story roofs require more setup and fall protection.
How to compare metal-roof bids
Ask every roofer to price the same assembly. Request the manufacturer, panel profile, gauge, finish, underlayment, clip/fastener spacing, trim package, ventilation plan, tear-off and disposal, permit allowance, and workmanship warranty in writing. Confirm who obtains the permit and whether the quote includes deck repairs or only an allowance.
A low bid may omit tear-off, flashing, or trim. A high bid may include premium materials or more complex details. Reconcile scope line by line rather than treating either total as the expected market price.
Service life and lifecycle cost
Small repairs keep a metal roof working: Angi's 2026 data puts the average metal roof repair at $1,918 (based on 2,354 projects). See roof repair cost for other repair types.
Our model lists broad planning lives of 30–45 years for corrugated metal and 40–70 for standing seam. These are not warranties. Climate, coating, installation, maintenance, and the exact product matter. Divide the comparable installed price by a conservative service-life assumption only after you have comparable bids; do not assume the longest advertised life.
Use the roof replacement cost calculator to build a starting estimate for roof size, pitch, shape, and state. For other systems, see the 2026 roof cost guides.
Metal roof vs shingles: cost over time
Metal costs more on day one. On the same national example as the table above (a 2,000 sq ft one-story footprint, 2,240 sq ft of roof, medium pitch, an old shingle roof torn off), our model puts architectural shingles at $14,000–$18,500, corrugated metal at $13,500–$26,300 and standing seam at $25,800–$41,100.
The gap narrows once you spread the price over the planning life in our model: 25–30 years for architectural shingles, 30–45 for corrugated metal and 40–70 for standing seam. Dividing the low price by the long life, and the high price by the short life, gives a cost per year of roof:
| Roof | Installed (national example) | Planning life | Cost per year |
|---|---|---|---|
| Architectural shingles | $14,000–$18,500 | 25–30 years | $467–$740 |
| Corrugated metal | $13,500–$26,300 | 30–45 years | $300–$877 |
| Standing seam metal | $25,800–$41,100 | 40–70 years | $369–$1,028 |
The ranges overlap, so metal is not automatically cheaper over time. It pays off when you stay in the house long enough to use the longer life and the roof is installed and maintained well. If you plan to sell within 10–15 years, the lower upfront price of shingles usually matters more. Treat the lives as planning assumptions, not warranties.
For noise, insurance, energy and when each roof makes more sense, see our full metal roof vs shingles comparison.
Sources and limits
Our installed ranges are 2026 planning estimates from the material model described in our methodology; the house-size estimates were calculated from it on November 16, 2026, and the Angi, Fixr and Cost vs. Value figures were checked the same day. We also compare Homewyse’s standing-seam metal roof calculator, Angi’s 2026 roof replacement guide, Fixr’s roof replacement guide, and BLS roofer wage data. These sources measure different scopes, so we use them as planning inputs, not as a single quote database or a guarantee. Check current local bids and the product manufacturer’s specifications before choosing a roof. Homewyse’s 2026 standing-seam calculator runs noticeably higher than our model range, so treat our metal figures as the lower end of planning and lean on local bids.
Frequently asked questions
How much does a metal roof cost in 2026?
TheRoofBill’s 2026 installed planning ranges are $5–$10 per roof square foot for corrugated metal and $10–$16 for standing seam. Roof complexity, tear-off, underlayment, flashing, and local labor change the quote.
What is the average cost of a metal roof?
It depends heavily on the system and roof size. Angi's 2026 data puts an average steel roof at $19,000, with most between $16,000 and $28,000; Fixr's 2026 guide averages $26,500 for a 2,400 sq ft steel roof. In TheRoofBill's national baseline example, replacing shingles with standing seam on a 2,000 sq ft one-story house runs about $25,800–$41,100, and corrugated panels about $13,500–$26,300.
How much does metal roof repair cost?
Angi's 2026 data puts the average metal roof repair at $1,918, based on 2,354 projects, and Fixr's repair data gives $500–$2,000 for metal roofs. Loose fasteners and sealant at exposed-fastener panels are common small repairs; damaged panels cost more.
Is standing seam worth the extra cost?
It can be a good fit when concealed fasteners, long service life, or architectural appearance matter, but value depends on the installed premium, maintenance, and how long you will own the home. Compare written bids for the same panel, gauge, finish, underlayment, and details.
Can metal roofing go over shingles?
Sometimes local code and roof condition allow an overlay, but it can hide damaged decking and affect assembly details. Ask the building department and roofer to document whether tear-off is required and how the existing roof is handled.
Cost figures are planning estimates based on 2026 public data (Homewyse, Angi, Fixr, BLS). They are not contractor quotes. Full disclaimer · How we calculate.