Contractor Guides · 2026

Metal Roof vs Shingles: Which Is Better?

Metal roof vs shingles compared: installed cost, lifespan, cost per year, noise, energy, insurance and resale. See which roof is better for your home and budget.

$25,800–$41,100

Short answer

Metal roof vs shingles compared: installed cost, lifespan, cost per year, noise, energy, insurance and resale. See which roof is better for your home and budget.

The short answer

Shingles cost less up front and metal lasts longer. On a 2,000 sq ft home at national rates, architectural shingles run about $14,000–$18,500 and standing seam metal about $25,800–$41,100. Metal lasts 40–70 years against 25–30 for shingles, so it makes more sense the longer you plan to stay.

Most homeowners comparing the two are choosing between architectural asphalt shingles and standing seam metal. Exposed-fastener metal panels sit between them on price, so they appear in the tables too.

Quick comparison

Architectural shinglesExposed-fastener metalStanding seam metal
Installed cost (2,000 sq ft home)$14,000–$18,500$13,500–$26,300$25,800–$41,100
Lifespan25–30 years30–45 years40–70 years
Cost per year$509–$673$360–$701$469–$747
Wind and hailStandard shingles bruise in hail; impact-rated versions cost moreDents in large hail; screws can loosen in high windResists wind well; can dent, but dents are usually cosmetic
NoiseQuietQuiet over solid deck; loud over open framingQuiet over solid deck and underlayment
EnergyAbsorbs heat unless you choose reflective granulesReflects more sun with light or coated finishesReflects more sun with light or coated finishes
RepairsCheap and easy; most roofers can do themFastener checks and replacement over timeFewer repairs, but fewer roofers can do them
Curb appealFamiliar look that suits most housesRural or utility lookClean, modern lines
Best forLower budgets and shorter staysGarages, barns, low-cost metalLong stays, high wind, wildfire areas

Costs are our calculator's output for the site's standard roof, and lifespans and cost per year come from how long does a roof last.

Cost: metal roof vs shingles

We priced both materials in our calculator on one example. It's a 2,000 sq ft one-story home with 2,240 sq ft of roof, a medium pitch, national labor rates, and an old shingle roof torn off and hauled away. Permits and a 10% allowance for decking repairs are included.

RoofInstalled price per roof sq ft2,000 sq ft home, national
Architectural asphalt shingles$5.21–$6.82$14,000–$18,500
Exposed-fastener (corrugated) metal$5–$10$13,500–$26,300
Standing seam metal$10–$16$25,800–$41,100

The per-square-foot figures are the model's installed inputs for the roofing itself. The totals add tear-off, disposal, permits and the decking allowance. Standing seam costs roughly 1.8 to 2.2 times as much as architectural shingles on the same roof. Exposed-fastener panels can come in close to shingles at the low end, but they are less common on houses.

Neither total includes gutters, new skylights, chimney rebuilds or structural repairs beyond the decking allowance. Those add the same work to either roof, but metal flashing around chimneys and skylights takes more custom bending, so each one adds more to a metal bid than to a shingle bid. Count them before you compare quotes.

Labor rates move both numbers. A home in a high-labor state pays more for either roof, and the gap in dollars grows with it. The metal roof cost page breaks down metal by panel type and gauge, and the asphalt shingle roof cost page does the same for shingles. For your own roof, the standing seam metal roof cost calculator prices seam height, gauge and finish.

Lifespan and cost per year

Metal's case rests on lifespan. Architectural shingles run about 25–30 years, exposed-fastener metal 30–45 years and standing seam 40–70 years. The ranges match the planning lives in our cost model and fall inside published ranges from InterNACHI, NAHB and NRCA.

Dividing the installed range by the midpoint of each lifespan gives a cost per year of roof:

RoofInstalledLifespan midpointCost per year
Architectural shingles$14,000–$18,50027.5 years$509–$673
Exposed-fastener metal$13,500–$26,30037.5 years$360–$701
Standing seam metal$25,800–$41,10055 years$469–$747

The ranges overlap, so neither roof is cheaper per year in every case. Standing seam wins only if it actually reaches the long end of its life, and you only collect on that if you own the house. A buyer may pay more for a newer metal roof, but you can't count on getting the full cost back at sale.

Our metal roof cost page brackets the same figures more widely. It divides the low price by the longest life and the high price by the shortest. Both methods point to the same conclusion.

Weather, hail and insurance

Wind. Standing seam panels lock together along their seams and have no exposed screws, so they hold up well in high wind when installed to the maker's instructions. Shingles depend on nailing pattern and seal strips. Check the wind rating on the product you are quoted, not just the material.

Hail. Standard shingles bruise and lose granules in hail. Class 4 impact-rated shingles, tested under UL 2218, resist it better and cost more. Metal rarely leaks after hail, but it can dent, and many policies treat dents that don't let water in as cosmetic. Some insurers sell policies that exclude cosmetic damage to metal roofs, so read that clause before you file a claim. The hail damage roof claim guide walks through the process.

Fire. Metal panels don't burn, and many metal roof assemblies carry a Class A fire rating. Most asphalt shingles also carry Class A ratings, so compare the rated assembly rather than the material name.

Insurance. Some insurers discount premiums for impact-rated or wind-resistant roofs, and a few states require insurers to offer such discounts. Amounts vary by insurer and state, so get the discount in writing from your agent before you choose the roof for it. Roof age also affects claims. How actual cash value and replacement cost payouts work is explained in ACV vs RCV roof insurance. In Florida, where wind rules shape roof choices, see Florida metal roof cost.

This is general information, not legal, tax or insurance advice. Check your policy or a licensed professional for your situation.

Noise, heat and energy

Noise. The loud tin-roof sound comes from metal fastened over open framing. A house roof normally goes over solid plywood or OSB, an underlayment and an insulated attic, and those layers absorb most of the rain noise. If quiet matters to you, ask the roofer about the underlayment and attic insulation, and listen to a finished metal roof in the rain before you decide.

Heat. Metal expands and contracts with temperature. Standing seam systems use clips that let the panels move, and exposed-fastener panels flex at each screw, which is one reason those screws need attention over time.

Energy. Light-colored and specially coated metal reflects more sunlight than standard dark shingles, which can lower attic temperatures and cooling demand in hot, sunny climates. Reflective "cool" shingles exist too. The Cool Roof Rating Council publishes reflectance ratings, so compare the rated values of the actual products. In cold climates the energy benefit is smaller, because the roof is reflecting sun you might want in winter.

When shingles make more sense

  • You plan to move within about 10 years. You pay for metal's long life up front and leave most of it to the next owner.
  • Your budget is tight. Architectural shingles cost roughly half as much on the same roof, and that difference can cover other repairs.
  • The roof is complex. Many valleys, dormers and skylights raise metal's labor cost more than shingles'.
  • You want easy repairs. Nearly any roofer can replace a few shingles. Standing seam repairs need a crew that installs it.
  • Your HOA requires a shingle look. Check the rules before you price metal.

When metal makes more sense

  • You plan to stay 20 years or more. You get value from the decades metal lasts past a shingle roof's life.
  • You live with high wind, heavy snow or wildfire risk. Metal sheds snow, resists wind uplift and doesn't burn.
  • You are replacing an old roof that failed early. A roof that never lasted its rated life may be fighting heat and sun, which shingles handle poorly.
  • You want fewer replacements. One standing seam roof can outlast two shingle roofs, which also means one less tear-off for the landfill.
  • The roof is simple. Long, plain slopes are where metal installs fastest and costs least per square foot.

Get prices for your home

The calculator below is preset to standing seam metal on a 2,000 sq ft home at national labor rates. Switch the material to architectural shingles to see both prices for the same roof, then change the state, pitch and roof size to match your house.

Calculator

Roof cost calculator

Preset to the national labor baseline and a 2,000 sq ft home (2,240 sq ft of roof). Change any input for an itemized 2026 estimate. The link in your address bar saves your inputs.

01

Material

Model rate: $10.00–$16.00 per roof sq ft installed.

02

Roof area

Area unit

Roof surface, not floor area. One roofing square = 100 sq ft. 2,240 sq ft = 22.4 squares.

03

Roof pitch

Steeper roofs take more labor and safety setup.

04

Complexity

05

Stories

06

Old layers to tear off

Tear-off: $50–$85 per square per layer.

07

Location

State labor factor from BLS roofer wages. ZIP is optional and never stored.

+

Extras (optional)

Itemized planning estimate

Your roof bill

National baseline · 2,240 sq ft roof

Planning estimate
Materials & installation2,240 sq ft × $10.00–$16.00 × 1.00 adjustments$22,400–$35,840
Tear-off22.4 squares × $50–$85 × 1 layer$1,120–$1,910
Permits & disposalModel default, scaled to 1.6× at the high end$300–$480
Decking contingency10% of base, for damaged decking found mid-job$2,240–$3,590

Estimated installed total · Standing Seam Metal

$26.0k–$41.9k
Low$26,100
Typical (midpoint)$33,900
High$41,800

$1,160–$1,870 per roofing square, all in. Planning life 40–70 years.

Not included: gutters and structural repairs beyond decking.

Planning estimate only, not a contractor quote. Actual cost depends on roof condition, local requirements, and the work included.

Two written quotes on the same measured roof are the best way to settle the choice: one for architectural shingles and one for standing seam, each with tear-off, underlayment and flashing listed. Ask each roofer for the manufacturer and workmanship warranty terms, and compare them side by side.

Sources

SourceWhat it gave usDate
TheRoofBill methodologyInstalled prices per sq ft, tear-off, permits and decking allowanceUpdated with each pricing review
InterNACHI, Standard Estimated Life Expectancy Chart for HomesAsphalt and metal lifespansUndated chart; checked November 18, 2026
NAHB/Bank of America Home Equity, Study of Life Expectancy of Home ComponentsMetal roofing 40–80 yearsFebruary 2007; checked November 18, 2026
Roof Observations, roof lifespan for every type of roofService lives next to maximum manufacturer warrantiesUndated; checked November 18, 2026

Prices are planning ranges for the standard example, not quotes.

The next step

Get your number in 60 seconds.

Answer a few quick questions and get an itemized 2026 estimate for your roof. No email, no sales calls.

Open the Roof Cost Calculator →

Based on 2026 public cost data. See the methodology.

Frequently asked questions

Is a metal roof worth it over shingles?

It can be if you plan to stay long enough to use its longer life. On our national example, standing seam costs $25,800–$41,100 against $14,000–$18,500 for architectural shingles, but lasts about 40–70 years instead of 25–30. Spread over those lives, the cost per year overlaps. If you expect to sell within about ten years, shingles usually make more financial sense.

Is a metal roof louder in rain?

Usually not by much on a house. Metal installed over solid roof sheathing and underlayment, with an insulated attic below, sounds close to a shingle roof from inside. Metal fastened over open framing, as on a barn or carport, is much louder. Ask the roofer what will go under the panels.

Can you put a metal roof over shingles?

Sometimes. Many local codes allow metal over one layer of asphalt shingles when the deck underneath is sound, and some manufacturers allow it with a specific underlayment or battens. Codes and product instructions vary, and a hidden rotten deck stays hidden, so get your building department and the panel maker's instructions to agree before you skip the tear-off.

Does a metal roof lower insurance?

It might. Some insurers offer a discount for impact-rated or wind-resistant roofing, and a few states require insurers to offer one. Whether you qualify depends on the product's rating, your insurer and your state. Ask your agent before you buy. This is general information, not insurance advice.

Cost figures are planning estimates based on 2026 public data (Homewyse, Angi, Fixr, BLS). They are not contractor quotes. Full disclaimer · How we calculate.