Calculator · 2026

Roof Shingle Calculator

Divide your roof area by 100 to get roofing squares, add 10–15% for waste, then multiply by the bundles per square for your shingle (usually 3). A 2,240 sq ft roof is 22.4 squares; with 10% waste that's about 24.6 squares, or 74 bundles at 3 bundles per square.

Calculator

Count your squares, bundles and materials

01

How will you enter the roof?

02

Roof area (sq ft)

The sloped roof surface, from a measurement report or your roofer.

03

Roof shape

Sets the default waste: 10% for a simple gable, 15% for hips, valleys and dormers.

04

Waste (%)

Editable. Cutting at hips, valleys and rakes is where the waste goes.

05

Bundles per square

Most 3-tab and architectural shingles are 3. Some heavier designer shingles are 4. Check the wrapper.

06

Eave + rake length (ft, optional)

Every roof edge: the gutter edges plus the sloped gable edges. Used for starter strip.

07

Ridge + hip length (ft, optional)

Used for ridge cap.

08

Underlayment coverage per roll (squares)

Many synthetic rolls cover 10 squares (1,000 sq ft). Felt rolls cover less. Use your product's number.

09

Shingles per square

About 64 for many architectural shingles (3 bundles of 20–22). 3-tab runs higher. Check the wrapper.

10

Nails per shingle

Building code sets 4 per strip shingle as the minimum; high-wind patterns use 6. Follow the manufacturer.

Material takeoff

74 bundles

2,240 sq ft of roof · 10% waste

Squares2,240 sq ft ÷ 10022.4
Squares with waste22.4 × 1.1024.6
Shingle bundles24.6 × 3, rounded up74
Starter stripEaves + rakesEnter edges
Ridge capRidges + hipsEnter ridges
Underlayment rolls22.4 squares ÷ 10 per roll, rounded up3
Nails (approx.)24.6 squares × 64 shingles × 46,308

Check your shingle manufacturer's coverage per bundle and installation instructions; they vary by product.

How many shingles do I need?

The quick formula is in the answer above: roof area ÷ 100 = squares, add waste, then multiply by bundles per square and round up. The calculator also handles the parts people forget: starter strip along the edges, ridge cap over the peaks, underlayment and nails.

If you only know your home’s footprint, switch to Footprint + pitch. The calculator multiplies the footprint by the pitch multiplier to get the sloped roof area. For the full walk-through, with measuring tips and worked examples, read our guide on how many shingles do I need.

A worked example: a 60 × 30 ft house has an 1,800 sq ft footprint. At a 6/12 pitch the multiplier is 1.118, so the roof is about 2,012 sq ft, or 20.1 squares. Add 10% waste for a simple gable and you need about 22.1 squares. At 3 bundles per square that’s 66.4, which rounds up to 67 bundles of field shingles, before starter and ridge cap.

What is a roofing square?

A roofing square is 100 square feet of roof surface, a 10 by 10 ft patch. Shingles are packaged, sold and installed by the square, and contractors price labor the same way. A typical single-family roof runs roughly 15 to 30 squares, depending on its size and pitch. Our guide explains what a roofing square is and how to convert between squares, square feet and bundles.

How much waste to add

Waste covers the shingles that get cut and thrown away at hips, valleys, rakes and around chimneys and vents. The calculator starts at 10% for a simple gable roof and 15% for hip roofs and roofs with valleys or dormers, and you can change either. A roof with many short runs and intersections can need more. If you have a measurement report from your roofer or an aerial measuring service, use its waste figure instead.

Starter strips, ridge cap and underlayment

Starter strip runs along every eave and rake, under the first course. Enter your eave and rake length in feet and the calculator returns the linear feet you need. Starter is sold by the bundle, and each product lists its linear-foot coverage.

Ridge cap covers ridges and hips. Enter their combined length. Like starter, it’s sold in bundles rated by linear feet, so divide by the coverage on the wrapper.

Underlayment covers the whole deck. Many synthetic rolls cover 10 squares (1,000 sq ft); felt rolls cover less. The calculator divides your roof squares by the roll coverage you enter and rounds up, which leaves room for laps. In cold climates, code may also require ice barrier along the eaves.

Nails are estimated from shingles per square times nails per shingle. Code requires at least four per strip shingle, and high-wind installations use six.

From materials to total cost

Materials are only part of the bill. Labor, tear-off, disposal, permits and repairs to damaged decking make up the rest of the bill. To see the full installed price for your state, roof size and pitch, use the roof replacement cost calculator. For shingle-by-shingle price differences, see asphalt shingle roof cost. Still need your pitch? Start with the roof pitch calculator.

Frequently asked questions

How many bundles of shingles are in a square?

Most standard 3-tab and architectural asphalt shingles come three bundles to a square, so each bundle covers about 33.3 sq ft. Some heavier designer and luxury shingles take four or more bundles per square. The coverage is printed on the bundle wrapper, so check it before you order.

How many squares is a 2,000 sq ft roof?

A 2,000 sq ft roof is 20 roofing squares, because one square is 100 sq ft of roof surface. If 2,000 sq ft is your home's footprint instead, a 6/12 pitch makes the roof about 2,236 sq ft, or 22.4 squares, before you add waste.

How much extra shingles should I buy?

Plan on about 10% extra for a simple gable roof and about 15% for hip roofs or roofs with valleys and dormers, where more shingles are cut. A measurement report or your roofer's takeoff may use a different figure for your roof. Unopened bundles can often be returned, so check the supplier's policy.

How many nails per bundle of shingles?

It depends on the shingle. Code requires at least four nails per strip shingle, and high-wind patterns use six. At about 21 architectural shingles per bundle, that's roughly 84 nails per bundle with four nails, or 126 with six. Use the count on your shingle's installation instructions.

Cost figures are planning estimates based on 2026 public data (Homewyse, Angi, Fixr, BLS). They are not contractor quotes. Full disclaimer · How we calculate.