Cost Guides · 2026

Roof Replacement Cost for a 2,000 Sq Ft House in 2026

Reroofing a 2,000 sq ft house costs about $11,800–$15,700 in our 2026 asphalt-shingle example. See how roof area, material, pitch and tear-off change it.

$11,800–$15,700

Short answer

Reroofing a 2,000 sq ft house costs about $11,800–$15,700 in our 2026 asphalt-shingle example. See how roof area, material, pitch and tear-off change it.

Calculator

Roof cost calculator

Preset to the national labor baseline and a 2,000 sq ft home (2,240 sq ft of roof). Change any input for an itemized 2026 estimate. The link in your address bar saves your inputs.

01

Material

Model rate: $5.21–$6.82 per roof sq ft installed.

02

Roof area

Area unit

Roof surface, not floor area. One roofing square = 100 sq ft. 2,240 sq ft = 22.4 squares.

03

Roof pitch

Steeper roofs take more labor and safety setup.

04

Complexity

05

Stories

06

Old layers to tear off

Tear-off: $39–$53 per square per layer.

07

Location

State labor factor from BLS roofer wages. ZIP is optional and never stored.

+

Extras (optional)

Itemized planning estimate

Your roof bill

National baseline · 2,240 sq ft roof

Planning estimate
Materials & installation2,240 sq ft × $5.21–$6.82 × 1.00 adjustments$11,670–$15,280
Tear-off22.4 squares × $39–$53 × 1 layer$870–$1,190
Permits & disposalModel default, scaled to 1.6× at the high end$300–$480
Decking contingency10% of base, for damaged decking found mid-job$1,160–$1,530

Estimated installed total · Architectural Asphalt Shingles

$14.0k–$18.5k
Low$14,000
Typical (midpoint)$16,200
High$18,500

$630–$820 per roofing square, all in. Planning life 25–30 years.

Not included: gutters and structural repairs beyond decking.

Planning estimate only, not a contractor quote. Actual cost depends on roof condition, local requirements, and the work included.

The short answer: about $11,800–$15,700

For a 2,000-square-foot house, TheRoofBill's worked example estimates about $11,800-$15,700 for architectural asphalt shingles. That's a transparent planning example, not a national quote: it assumes a one-story Texas home, simple gable roof, 6/12 pitch, and one existing layer to remove. We show every input below so you can compare it with contractor bids.

The key detail: 2,000 sq ft of house is not necessarily 2,000 sq ft of roof. A sloped roof has more surface area than its footprint, and overhangs, dormers, valleys, and additions can increase it further.

The short answer

Plan around $11,800-$15,700 for the specific asphalt-shingle example in this guide. Use the roof replacement cost calculator with your state, material, pitch, and roof shape for a more relevant starting range.

What does the estimate include?

Here is the calculation for a 2,000 sq ft footprint with a medium-pitch, simple-gable roof in Texas. These are the same published inputs used in our cost methodology:

Estimate itemCalculationExample range
Roof surface area2,000 sq ft footprint × 1.12 slope factorAbout 2,240 sq ft
Architectural asphalt installation2,240 sq ft × $5.21-$6.82/sq ft × 0.83 Texas labor factorAbout $9,600-$12,700
One-layer tear-off22.4 roofing squares × $39-$53 per squareAbout $875-$1,190
Permits and disposal allowanceModel allowance$300-$480
Decking contingency10% of base installationAbout $970-$1,270
Estimated totalSum of the listed itemsAbout $11,800-$15,700

The inputs are estimates from the model, not a promise that a local roofer will charge these prices. The state factor is a wage-based estimate applied to the whole materials-and-installation line, not a local price survey; permits and disposal vary by municipality, and damaged decking beyond the contingency can add cost. Gutters, structural framing repairs, and financing are not included.

Why 2,000 square feet of house can mean more roof

House size usually refers to interior floor area or building footprint. Roofing is priced on the actual sloped surface. In this example, the model uses a 1.12 slope factor for a 6/12 pitch, turning a 2,000 sq ft footprint into roughly 2,240 sq ft of roof surface. That equals 22.4 roofing squares before material waste; one roofing square is 100 sq ft.

The roof can be larger still if the home has wide eaves, multiple wings, dormers, or many valleys. A two-story 2,000 sq ft home may have a smaller footprint than a one-story home of the same interior area, so its roof can require less material. Ask your roofer for the measured roof area and pitch rather than relying on home square footage alone.

Example planning ranges by house footprint

The table below scales the same example assumptions across several one-story home footprints. It is a comparison aid, not a set of national averages or measured roof quotes. For two-story homes, other materials and both readings of "1,000 sq ft," see roof replacement cost by house size.

One-story home footprintAssumed roof area at 6/12 pitchExample planning range
1,000 sq ftAbout 1,120 sq ft$6,000–$8,100
1,200 sq ftAbout 1,344 sq ft$7,200–$9,600
1,500 sq ftAbout 1,680 sq ft$8,900–$11,900
2,000 sq ftAbout 2,240 sq ft$11,800–$15,700
2,500 sq ftAbout 2,800 sq ft$14,700–$19,400
3,000 sq ftAbout 3,360 sq ft$17,500–$23,200

Each row assumes a simple-gable roof, architectural asphalt shingles, Texas labor adjustment, one layer removed, a 10% decking contingency, and the model's permit/disposal allowance. The roof-area estimate uses the model's 1.12 slope factor; it does not add overhangs, roof waste, extra stories, dormers, or other add-ons. The range is calculated from the same inputs shown in the worked example above. Change the location, roof shape, pitch, material, or tear-off assumptions in the calculator before using a figure for planning.

A 2,000 sq ft house by state, material and story count

The worked example above uses Texas. Here is the same one-story 2,000 sq ft footprint (about 2,240 sq ft of roof) with architectural shingles in other states, using the model's wage-based labor factors:

State (model labor factor)Estimate
National baseline (1.00)$14,000–$18,500
Arizona (0.85)$12,100–$16,000
Georgia (0.85)$12,000–$16,000
Florida (0.86)$12,200–$16,100
North Carolina (0.88)$12,500–$16,500
Ohio (0.89)$12,500–$16,700
Colorado (0.93)$13,100–$17,300
Pennsylvania (1.01)$14,100–$18,600
Washington (1.09)$15,100–$20,000
California (1.15)$15,900–$21,000
New York (1.19)$16,400–$21,700

And at the national baseline, by material and layout:

Option for a 2,000 sq ft houseEstimate
3-tab shingles, one story$11,000–$16,500
Architectural shingles, one story$14,000–$18,500
Architectural shingles, hip roof instead of gable$15,600–$20,500
Architectural shingles, two stories (1,000 sq ft footprint)$7,500–$9,900
Class 4 impact-resistant shingles, one story$17,200–$25,100
Standing seam metal, one story (shingles removed)$25,800–$41,100

Labor factors are statewide estimates from BLS wage ratios, not local price surveys. Totals are rounded to the nearest $100. For more sizes, see roof replacement cost by house size; for the lines behind any of these, see how to estimate roof replacement cost.

How other published 2026 estimates compare

Cost guides do not all measure the same thing. Angi's 2026 roof replacement guide reports a broad average and per-square-foot pricing; Fixr's 2026 guide gives a typical range and also discusses roof-area examples. Their figures can differ from this site's worked example because material, labor market, roof measurement, and included line items vary. Treat third-party averages as context, not as a direct comparison with a quote for your house.

  • Angi's 2026 roof replacement cost guide now reports a national average of $9,530, with most homeowners paying $5,870–$13,223, and says the average home has 1,300–1,800 sq ft of roof, well under this example's 2,240. Its $4–$11 per sq ft range covers all materials; applied to 2,240 sq ft of roof that's about $9,000–$24,600.
  • Fixr's 2026 roof replacement cost guide reports a typical project range of $7,500-$14,000 and an average of about $4.75 per sq ft, and explains that a 2,000 sq ft roof can cost more depending on material and scope.

Those are market-guide estimates, not a guarantee of current local pricing. In particular, a source's “2,000 sq ft roof” means roof surface area; it should not be read as a 2,000 sq ft house.

What changes the cost most?

  • Roofing material: Architectural asphalt is the basis for our example. Metal, tile, slate, and premium shingles have different installation and tear-off costs. Compare material ranges in the calculator.
  • Pitch and shape: Steeper roofs take longer and require more safety setup. Hips, dormers, and valleys add cuts and complexity compared with a plain gable.
  • Location: Labor and permit costs vary. Our example uses Texas's 0.83 labor factor; it is not a national average and should not be applied to another state.
  • Existing roof layers: The example removes one asphalt layer. A second layer or a heavier existing material adds tear-off and disposal work.
  • Decking condition: Rot discovered after the old covering comes off can require replacement. The model includes a 10% contingency for decking, but severe damage can exceed it.
  • Access and height: Multi-story homes, limited staging space, and difficult driveway access can affect labor and debris handling.

How to compare roofing bids

Request at least two or three written estimates and check that each one uses the same scope. A useful bid states the measured roof area and pitch, material brand and product line, underlayment and flashing, number of layers removed, disposal, permit responsibility, decking price, ventilation work, and workmanship warranty. Ask whether the quoted total includes tax and cleanup.

If one bid is dramatically lower, find out whether it excludes tear-off, assumes no decking repairs, or uses a different shingle grade. The roof repair vs. replacement guide can help you decide whether a full replacement is the right scope before comparing prices.

The next step

Get your number in 60 seconds.

Answer a few quick questions and get an itemized 2026 estimate for your roof. No email, no sales calls.

Open the Roof Cost Calculator →

Based on 2026 public cost data. See the methodology.

Sources and estimate date

The worked example follows TheRoofBill's published 2026 cost model, including its material ranges, Texas labor factor, tear-off range, permit allowance, and decking contingency. External market context was rechecked against Angi and Fixr on November 16, 2026 (Angi's average moved from $9,609 to $9,530 since our October check). The state and material tables were calculated from the model the same day. Actual contractor pricing changes by market and project scope.

Compare other projects and materials in our 2026 roof cost guides.

The next step

Get your number in 60 seconds.

Answer a few quick questions and get an itemized 2026 estimate for your roof. No email, no sales calls.

Open the Roof Cost Calculator →

Based on 2026 public cost data. See the methodology.

Frequently asked questions

How much does it cost to replace a roof on a 2,000 sq ft house in 2026?

TheRoofBill's worked example comes to roughly $11,800-$15,700 for a one-story Texas home with a simple gable, medium-pitch architectural asphalt roof, and one layer to remove; at the national baseline it's about $14,000-$18,500. A two-story 2,000 sq ft house has about half the roof and comes to roughly $7,500-$9,900. Your roof area, location, material, and contractor quote can move the price substantially.

Is a 2,000 sq ft house roof also 2,000 sq ft?

Usually not. House square footage generally describes the floor footprint, while roof area grows with slope, overhangs, and roof shape. In our example, a 2,000 sq ft footprint becomes about 2,240 sq ft of roof area at a 6/12 pitch, before any extra complexity allowance.

How many roofing squares does a 2,000 sq ft house need?

Using the example's 2,240 sq ft roof area, it is about 22.4 roofing squares before waste. A roofing square covers 100 sq ft; a contractor's material order may be larger to account for cuts, valleys, and the product's installation requirements.

What is the cheapest roof material for a 2,000 sq ft house?

Three-tab asphalt is generally among the lower-cost choices in our 2026 model, but the total depends on roof area, labor, tear-off, and local code. Compare complete written bids with the same scope; the lowest material price alone does not establish the lowest installed project cost.

Cost figures are planning estimates based on 2026 public data (Homewyse, Angi, Fixr, BLS). They are not contractor quotes. Full disclaimer · How we calculate.