Cost Guides · 2026

Roofing Labor Cost per Square (2026): Labor-Only Pricing

Shingle roofing labor runs about $200–$350 per square (100 sq ft) in HomeGuide's guide. See what labor-only covers and how it compares with installed price.

$200–$350

Short answer

Shingle roofing labor runs about $200–$350 per square (100 sq ft) in HomeGuide's guide. See what labor-only covers and how it compares with installed price.

Calculator

Roof cost calculator

Preset to the national labor baseline and a 2,000 sq ft home (2,240 sq ft of roof). Change any input for an itemized 2026 estimate. The link in your address bar saves your inputs.

01

Material

Model rate: $5.21–$6.82 per roof sq ft installed.

02

Roof area

Area unit

Roof surface, not floor area. One roofing square = 100 sq ft. 2,240 sq ft = 22.4 squares.

03

Roof pitch

Steeper roofs take more labor and safety setup.

04

Complexity

05

Stories

06

Old layers to tear off

Tear-off: $39–$53 per square per layer.

07

Location

State labor factor from BLS roofer wages. ZIP is optional and never stored.

+

Extras (optional)

Itemized planning estimate

Your roof bill

National baseline · 2,240 sq ft roof

Planning estimate
Materials & installation2,240 sq ft × $5.21–$6.82 × 1.00 adjustments$11,670–$15,280
Tear-off22.4 squares × $39–$53 × 1 layer$870–$1,190
Permits & disposalModel default, scaled to 1.6× at the high end$300–$480
Decking contingency10% of base, for damaged decking found mid-job$1,160–$1,530

Estimated installed total · Architectural Asphalt Shingles

$14.0k–$18.5k
Low$14,000
Typical (midpoint)$16,200
High$18,500

$630–$820 per roofing square, all in. Planning life 25–30 years.

Not included: gutters and structural repairs beyond decking.

Planning estimate only, not a contractor quote. Actual cost depends on roof condition, local requirements, and the work included.

Roofing labor cost per square: the short answer

Roofing labor for an asphalt shingle roof costs about $200–$350 per square, or $2.00–$3.50 per square foot, in HomeGuide's roofing labor cost guide (checked November 13, 2026). One square is 100 sq ft of roof surface. That price is labor only: shingles, underlayment, flashing, tear-off and disposal are extra.

The short answer

Budget about $200–$350 per square for shingle installation labor, $300–$350 for architectural shingles and $400–$800 for metal, per HomeGuide. On a 20-square roof that is roughly $4,000–$7,000 of labor for shingles. A full installed job costs more, about $12,500–$16,500 for the same roof in TheRoofBill's national baseline example below.

TheRoofBill's own cost model prices roofs as installed cost (materials and labor together), so the labor-only figures on this page come from the sources named next to them. We show both so you can see how they fit together, and where they don't.

What is a roofing square?

A roofing square is 100 square feet of roof surface, not floor area. A sloped roof has more surface than the footprint under it: at a 6/12 pitch the model multiplies the footprint by 1.12, so a 2,000 sq ft one-story footprint becomes about 2,240 sq ft, or 22.4 squares. HomeGuide notes that pitched roofs commonly have 15% to 40% more area than the home's floor area. Our roofing square guide covers measuring and waste.

Three units show up on bids:

UnitMeansLabor example (HomeGuide shingle range)
Per squarePer 100 sq ft of roof$200–$350
Per square footPer 1 sq ft of roof$2.00–$3.50
Per hourBilled crew time$30–$100 per hour

If a quote says "$450 a square," ask whether that is labor only or materials and labor. That single question explains most of the confusion between labor-only guides and installed-cost guides.

Labor cost per square by roofing type

HomeGuide's table gives these labor-only ranges per square. They exclude materials and removal of the old roof.

Roofing typeLabor per square (100 sq ft)Labor on a 20-square roof
Asphalt shingles (3-tab)$200–$300$4,000–$6,000
Architectural shingles$300–$350$6,000–$7,000
Flat, rolled or built-up$200–$450$4,000–$9,000
Metal$400–$800$8,000–$16,000
Wood shake$400–$800$8,000–$16,000
Slate or stone$400–$1,400$8,000–$28,000
Tile$500–$1,700$10,000–$34,000

The 20-square column is simple multiplication (20 × the per-square range). HomeGuide's headline shingle figure is $200–$350 while its table shows $200–$300 for basic asphalt; we report both rather than pick one. Removal of the old roof is separate: HomeGuide lists $1–$3 per sq ft for shingles or metal and $2–$5+ for slate or tile.

Labor-only vs installed price

Labor is one line of a roof bill. The table puts HomeGuide's labor range next to the installed figures from TheRoofBill's model for the same 20-square architectural shingle roof, at the model's national baseline (labor factor 1.00), medium pitch, simple gable, one story and one layer removed.

Line on the billPer square20-square roofSource
Installation labor only$300–$350$6,000–$7,000HomeGuide, architectural shingles
Materials and installation together$521–$682$10,420–$13,640TheRoofBill model input
Tear-off, one layer$39–$53$780–$1,060TheRoofBill model input
Permits and disposalper job$300–$480TheRoofBill model input
Decking contingency (10% of base)$52–$68$1,042–$1,364TheRoofBill model input
Full installed job$627–$827$12,500–$16,500Sum of model lines

Two honest caveats about this comparison:

  • The sources don't share one basis. HomeGuide's labor range and our installed rate were not built from the same jobs. Read the labor row as a separate market reference, not a slice of the model's figure.
  • Our tear-off rate is on the low side of the market. The model uses $39–$53 per square per layer. HomeGuide's removal figure for shingles is $100–$300 per square, and Fixr's 2026 roof replacement page cites an average of about $50 per square including dumping fees. If a bid prices tear-off well above our figure, that alone is not a red flag. See the roof tear-off cost guide for the full comparison.

As a cross-check, HomeGuide says labor makes up 50% to 70% of a roof replacement. Applied to the model's $521–$682 installed rate, that would imply roughly $260–$477 per square of labor, which overlaps HomeGuide's direct $300–$350 architectural range.

Why a roofer's wage is not the labor price

The BLS Occupational Employment and Wage Statistics survey for roofers (SOC 47-2181), May 2025, reports a median wage of $26.65 an hour and a mean of $27.95, with the 10th to 90th percentile running about $18.01 to $39.29. Those are employee wages. They exclude self-employed roofers, and they are not what a homeowner pays.

The gap between wage and price is easier to see per square. RoofSnap's contractor labor-estimating guide (updated April 3, 2026) works through a five-person crew: one foreman at $260 a day, four installers at $220 a day and $240 a day of payroll burden, for $1,380 per crew-day. That installer day is close to the BLS mean wage for eight hours ($27.95 × 8 = $223.60).

Roof type (RoofSnap categories)Squares per crew-dayCrew cost per squareCrew cost, 20 squares
Walkable, simple18–24 (example uses 20)$69$1,380
Moderate pitch, some cut-up12–18 (example uses 14)$99$1,970
Steep or highly complex6–12 (example uses 8)$173$3,450

RoofSnap is explicit that these are costs before overhead and profit. A homeowner-facing labor price of $200–$350 per square also has to cover the company's insurance, trucks and equipment, office and sales staff, warranty callbacks, slow weeks and margin. That's why a quote that seems to "pay the crew" several times over is normal, and why an unusually low labor price is worth questioning: something in that list is being skipped or underpaid.

What changes the labor cost per square

  • Pitch and walkability. In RoofSnap's example, crew cost per square more than doubles from a simple walkable roof ($69) to a steep, complex one ($173). TheRoofBill's model applies a steepness multiplier of 1.25 for 7/12–9/12 and 1.60 for 10/12 and steeper.
  • Cut-up roofs. Hips, valleys, dormers and skylights slow production and add flashing work. The model uses 1.12 for hip roofs and 1.28 for complex roofs.
  • Height and access. Second and third stories mean more ladder and debris handling. The model adds 5% for two stories and 10% for three.
  • Tear-off layers. Each existing layer is removed and hauled separately. Two layers roughly double the tear-off line.
  • Material. Tile, slate and standing seam need specialized skills and handling, which is why their labor ranges in the table above run higher.
  • Location and season. The model's state factors, from BLS wage ratios, range from 0.79 in Oklahoma to 1.41 in Illinois; in the model they scale the whole installed line, not labor alone. HomeGuide adds that labor prices rise after widespread storm damage and that off-season work is typically cheaper but may take longer.

How to read the labor line on a roofing quote

A clear quote lets you check the labor price against the scope. Ask each roofer to confirm:

  1. Measured roof area and pitch, in squares, from a measurement report or a site measurement.
  2. Whether the per-square price is labor only or installed. Get it written next to the number.
  3. Tear-off: number of layers, the per-square rate, and whether dumpster and landfill fees are inside it.
  4. Decking: a per-sheet price for replacing damaged boards. See roof decking replacement cost.
  5. Flashing, vents and drip edge: replaced or reused, and whether they are priced separately.
  6. Who supplies materials and who warrants them if you supply your own.
  7. Workmanship warranty length, in writing.

Our roofing estimate red flags checklist covers the rest.

Regional limits of these figures

Neither the labor ranges above nor the model's state factors are local price surveys. BLS wages differ widely by state and metro, and roofing prices in markets recovering from major storms can run above every range on this page. For a starting estimate with your state, pitch, shape and material, use the roof replacement cost calculator, then compare it with written local bids.

The next step

Get your number in 60 seconds.

Answer a few quick questions and get an itemized 2026 estimate for your roof. No email, no sales calls.

Open the Roof Cost Calculator →

Based on 2026 public cost data. See the methodology.

Sources and fact-check date

Checked November 13, 2026:

  • HomeGuide, roofing labor cost: labor per square by material, removal per square foot, hourly rates, labor share of total. The page shows no update date.
  • U.S. Bureau of Labor Statistics, OEWS May 2025, Roofers (47-2181): median and mean hourly wages and percentiles.
  • RoofSnap, How to Estimate Labor Cost for Roofing, last modified April 3, 2026: crew-day example and production rates (a contractor-software vendor's worked example, not a survey).
  • Fixr, roof replacement cost (2026 data): tear-off and disposal averaging about $50 per square including dumping fees.
  • TheRoofBill methodology: installed rates, tear-off, permits, decking contingency and multipliers.

More project costs are in our 2026 roof cost guides.

The next step

Get your number in 60 seconds.

Answer a few quick questions and get an itemized 2026 estimate for your roof. No email, no sales calls.

Open the Roof Cost Calculator →

Based on 2026 public cost data. See the methodology.

Frequently asked questions

What is the roofing labor cost per square in 2026?

HomeGuide's roofing labor guide, checked November 13, 2026, puts shingle installation labor at $200–$350 per square (100 sq ft), or $2.00–$3.50 per square foot, not including materials. Its table lists $300–$350 for architectural shingles and $400–$800 for metal. These are third-party ranges, not TheRoofBill model inputs.

How much do roofers charge per hour?

HomeGuide lists $30–$100 per hour for roofing work. That is a billed rate, not a wage: the BLS May 2025 median wage for roofers was $26.65 an hour. The difference covers payroll taxes, workers' compensation insurance, equipment, overhead and profit. Most roofers quote full replacements per square, not by the hour.

Is labor cheaper than materials on a new roof?

On an asphalt shingle roof, usually not. HomeGuide says labor is 50% to 70% of a roof replacement, and its per-square table shows shingle labor ($200–$350) above shingle materials ($100–$250). Heavier materials such as tile and slate cost more on both lines.

Can I hire a roofer for labor only and buy the shingles myself?

Some roofers accept labor-only jobs, but many prefer to supply materials because the shingle maker's enhanced warranties usually require an approved installer and a full system of matching components. Ask in writing who warrants the materials, who handles returns and shortages, and whether the price changes if your order is short.

Cost figures are planning estimates based on 2026 public data (Homewyse, Angi, Fixr, BLS). They are not contractor quotes. Full disclaimer · How we calculate.