Cost Guides · 2026

Gutter Replacement and Installation Cost (2026)

Gutter replacement costs $7–$29 per linear foot in 2026. See installed prices for aluminum, steel, copper and seamless gutters, plus guards and downspouts.

$7–$29

Short answer

Gutter replacement costs $7–$29 per linear foot in 2026. See installed prices for aluminum, steel, copper and seamless gutters, plus guards and downspouts.

Calculator

Roof cost calculator

Preset to the national labor baseline and a 2,000 sq ft home (2,240 sq ft of roof). Change any input for an itemized 2026 estimate. The link in your address bar saves your inputs.

01

Material

Model rate: $5.21–$6.82 per roof sq ft installed.

02

Roof area

Area unit

Roof surface, not floor area. One roofing square = 100 sq ft. 2,240 sq ft = 22.4 squares.

03

Roof pitch

Steeper roofs take more labor and safety setup.

04

Complexity

05

Stories

06

Old layers to tear off

Tear-off: $39–$53 per square per layer.

07

Location

State labor factor from BLS roofer wages. ZIP is optional and never stored.

+

Extras (optional)

Itemized planning estimate

Your roof bill

National baseline · 2,240 sq ft roof

Planning estimate
Materials & installation2,240 sq ft × $5.21–$6.82 × 1.00 adjustments$11,670–$15,280
Tear-off22.4 squares × $39–$53 × 1 layer$870–$1,190
Permits & disposalModel default, scaled to 1.6× at the high end$300–$480
Decking contingency10% of base, for damaged decking found mid-job$1,160–$1,530

Estimated installed total · Architectural Asphalt Shingles

$14.0k–$18.5k
Low$14,000
Typical (midpoint)$16,200
High$18,500

$630–$820 per roofing square, all in. Planning life 25–30 years.

Not included: gutters and structural repairs beyond decking.

Planning estimate only, not a contractor quote. Actual cost depends on roof condition, local requirements, and the work included.

Gutter installation cost: the short answer

Most homes get seamless aluminum gutters, which cost about $9–$13 per linear foot installed in Angi's 2026 aluminum gutter guide. Angi's average aluminum job is $2,400, with most between $900 and $3,300. A one-story house needing 150 linear feet comes to about $1,050–$1,800 at Angi's $7–$12 per-foot range.

The short answer

Gutters are priced by the linear foot of eave, not by roof area. Measure the edges that drain, add downspouts and any guards, and ask whether removing the old system is included. TheRoofBill's roof estimates don't include gutters; they are a separate job and a separate line.

Gutter cost per foot by material

Gutter materialInstalled cost per linear footSource
VinylUp to about $6Angi, popular gutter materials
Aluminum, seamed sections$7–$10Angi, aluminum gutter cost (2026)
Aluminum, seamless$9–$13Angi, aluminum gutter cost (2026)
Galvanized steel$8–$13Angi, popular gutter materials
Stainless steel$16–$20Angi, popular gutter materials
Copper$25–$29This Old House, updated October 9, 2026 (Homewyse 2026 estimates)
Zinc, seamless$35–$45Angi, seamless gutters cost

The sources don't use identical scopes, so read the table as a comparison of materials, not one price list. Angi puts labor at 20% to 50% of the job, about $1.40–$6 per linear foot.

Linear feet vs roof square footage

Gutters run along the eaves, the horizontal roof edges that shed water. Roof area doesn't tell you how many feet you need; the roof's shape does.

House (one story, 1,800 sq ft)Roof shapeEdges with guttersLinear feet
60 × 30 ftGableTwo long eaves120
60 × 30 ftHipAll four sides180
Rule of thumbAnyLiving area ÷ 10180

This Old House's rule of thumb (divide square footage by 10) matches the hip roof here, but overcounts the gable house by 60 feet. Measure along the fascia, or use the eave lengths on a roof measurement report. For a two-story house, measure the eaves of each roof level, including porch and garage roofs.

Gutters vs downspouts

Downspouts are priced separately, by the foot of vertical run. Angi's downspout guide gives an installed range of $6.50–$22.25 per linear foot for adding downspouts, with average installed prices by size of $6 (2×3 in), $8 (3×4 in) and $11 (4×5 in) per foot. Underground drainage adds $3–$8 per foot.

A one-story house with four downspouts of about 10 feet each needs 40 feet of downspout, about $260–$890 at Angi's range. Larger downspouts move more water and suit bigger roofs or heavy-rain areas; ask your installer which size your roof area calls for.

Guards, removal and fascia

  • Gutter guards: $5–$9 per foot in Angi's aluminum gutter guide, with a typical job of $700–$1,700. Types range from plastic screens ($80–$200 per job) to reverse-curve systems ($1,150–$4,300).
  • Old gutter removal: $80–$300 when a pro does it, and it's often included in the quote, per Angi.
  • Fascia: gutters hang from the fascia board. If it's soft or rotted, it has to be repaired before new gutters go up. Fixr's roof repair data puts soffit and fascia repair at $500–$6,000.

Worked examples

All use Angi's seamless aluminum range ($9–$13 per foot), Angi's downspout range ($6.50–$22.25 per foot), and $80–$300 for removing old gutters. Simple arithmetic, rounded to the nearest $10:

HouseGuttersDownspoutsRemovalEstimated total
One-story gable, 120 ft of eaves, 4 downspouts × 10 ft$1,080–$1,560$260–$890$80–$300$1,420–$2,750
One-story hip, 180 ft of eaves, 6 downspouts × 10 ft$1,620–$2,340$390–$1,340$80–$300$2,090–$3,980
Add guards to the gable house (120 ft)+$600–$1,080

Two-story homes need longer downspouts and taller ladders, so expect more per foot. Corners, miters and end caps are usually inside the per-foot price; confirm it on the quote.

Gutter replacement vs new installation

The per-foot prices above are for the gutters themselves, so a replacement and a first-time installation start from the same material cost. A replacement adds two things a new installation doesn't have:

  • Taking the old system down. Angi puts old gutter removal at $80–$300 when a pro does it, and many quotes already include it. Check the line item so you don't pay for it twice.
  • What the removal uncovers. Old gutters can hide soft or rotted fascia. It has to be repaired before new gutters go up, and Fixr puts soffit and fascia repair at $500–$6,000.

A first-time installation can still need new fascia or extra downspouts, but there's nothing to remove. Either way, ask the installer to measure the eaves, count the downspouts and state whether removal, haul-away and fascia repair are included.

If the boards behind your gutters are soft, see fascia and soffit replacement cost for per-foot prices by material.

When to replace gutters with the roof

A roof replacement often means detaching the gutters so the crew can install drip edge and the starter course at the eaves. If your gutters are near the end of their life, replacing them right after the reroof avoids taking them down twice. If they're sound, ask the roofer how they'll protect, detach and reattach them, and whether that's in the price.

Our roof replacement cost calculator and the planning figures on new roof cost exclude gutters. Add gutters as a separate line when you budget both jobs.

How to compare gutter quotes

ItemBid ABid B
Material and thickness or gauge
Seamless or sectional
Size (5 in or 6 in)
Linear feet of gutter
Number, size and length of downspouts
Hanger type and spacing
Old gutter removal and haul-away
Fascia repair: price per foot, approval required?
Guards: type and price per foot
Workmanship warranty
Total

If one quote's footage is far from yours, ask how it was measured before comparing prices. Our roofing estimate red flags apply to gutter bids too.

Keeping them working

Clean gutters cost far less than water damage. Angi's gutter cleaning guide puts a professional cleaning at $119–$234, about $167 on average. See roof maintenance cost for a yearly budget that includes gutters.

Sources and fact-check date

Checked November 15, 2026:

More project costs are in our 2026 roof cost guides.

The next step

Get your number in 60 seconds.

Answer a few quick questions and get an itemized 2026 estimate for your roof. No email, no sales calls.

Open the Roof Cost Calculator →

Based on 2026 public cost data. See the methodology.

Frequently asked questions

How much are gutters per foot?

In Angi's 2026 aluminum gutter data, installed aluminum gutters run $7–$13 per linear foot: $7–$10 for seamed sections and $9–$13 for seamless. Vinyl is cheaper, at up to about $6 per foot installed, and copper costs about $25–$29 per foot in This Old House's Homewyse-based figures.

How much do gutters cost for a house?

Angi puts the average aluminum gutter job at $2,400, with most between $900 and $3,300. A one-story house that needs 150 linear feet runs about $1,050–$1,800 in Angi's figures. Downspouts, guards and old-gutter removal can add to that.

How many feet of gutters does my house need?

Measure the roof edges that drain: the eaves. A simple gable has gutters on two sides, while a hip roof drains on all four. This Old House's rule of thumb (living area divided by 10) gives a quick estimate but can overcount a gable house. Add downspout length separately, roughly the wall height for each one.

Are gutters included in a roof replacement?

Usually not. Most roof replacement quotes, including TheRoofBill's calculator, price the roof covering, tear-off, flashing, permits and decking, not new gutters. If the gutters are coming off for the reroof anyway, ask whether replacing them at the same time changes the price or the order of work.

Cost figures are planning estimates based on 2026 public data (Homewyse, Angi, Fixr, BLS). They are not contractor quotes. Full disclaimer · How we calculate.