Cost Guides · 2026

Fascia and Soffit Replacement Cost in 2026

Fascia and soffit replacement cost per linear foot in 2026 for wood, aluminum and vinyl, plus rot repair and how fascia work ties in with gutters and a new roof.

$5–$22

Short answer

Fascia and soffit replacement cost per linear foot in 2026 for wood, aluminum and vinyl, plus rot repair and how fascia work ties in with gutters and a new roof.

Calculator

Roof cost calculator

Preset to the national labor baseline and a 2,000 sq ft home (2,240 sq ft of roof). Change any input for an itemized 2026 estimate. The link in your address bar saves your inputs.

01

Material

Model rate: $5.21–$6.82 per roof sq ft installed.

02

Roof area

Area unit

Roof surface, not floor area. One roofing square = 100 sq ft. 2,240 sq ft = 22.4 squares.

03

Roof pitch

Steeper roofs take more labor and safety setup.

04

Complexity

05

Stories

06

Old layers to tear off

Tear-off: $39–$53 per square per layer.

07

Location

State labor factor from BLS roofer wages. ZIP is optional and never stored.

+

Extras (optional)

Itemized planning estimate

Your roof bill

National baseline · 2,240 sq ft roof

Planning estimate
Materials & installation2,240 sq ft × $5.21–$6.82 × 1.00 adjustments$11,670–$15,280
Tear-off22.4 squares × $39–$53 × 1 layer$870–$1,190
Permits & disposalModel default, scaled to 1.6× at the high end$300–$480
Decking contingency10% of base, for damaged decking found mid-job$1,160–$1,530

Estimated installed total · Architectural Asphalt Shingles

$14.0k–$18.5k
Low$14,000
Typical (midpoint)$16,200
High$18,500

$630–$820 per roofing square, all in. Planning life 25–30 years.

Not included: gutters and structural repairs beyond decking.

Planning estimate only, not a contractor quote. Actual cost depends on roof condition, local requirements, and the work included.

Fascia and soffit replacement cost: quick answer

Fascia replacement costs about $5–$22 per linear foot installed: HomeGuide puts it at $5–$12 and Angi at $7–$22, averaging about $14.60 per foot. Soffit runs $4–$30 per linear foot ($4–$22 in HomeGuide's data, $6–$30 in Angi's). The typical job replaces 100–200 linear feet of eave. HomeGuide puts fascia alone at $500–$2,400 for that length and fascia plus soffit at $900–$6,800.

Fascia and soffit replacement cost breakdown

ItemTypical costSource
Fascia, installed$5–$22 per linear footHomeGuide; Angi
Soffit, installed$4–$30 per linear footHomeGuide; Angi
Soffit labor$5–$20 per linear footAngi
Old soffit removal and disposal$1–$4 per linear footAngi
Old fascia removal$3–$7 per linear footThis Old House
Painting fascia or soffit$2–$7 per linear footHomeGuide; Angi
Aluminum fascia capping (wrap)$3–$4 per linear footHomeGuide
General soffit and fascia repair, including rot$500–$2,600 (HomeGuide); $500–$6,000 (Fixr)HomeGuide; Fixr

HomeGuide notes its fascia price includes taking down and rehanging the existing gutters. Not every quote does, so ask.

What changes the price

  • Material. Wood is cheapest up front but needs paint. Vinyl, PVC and aluminum cost more and need little upkeep.
  • Rot behind the board. Soft fascia often means wet rafter tails or roof decking behind it, which turns a trim job into carpentry.
  • Soffit width and venting. Wider overhangs take more material, and vented soffit costs more than solid.
  • Gutters. Taking gutters down and rehanging them adds labor if the quote doesn't already include it.
  • Height and access. Two-story eaves need taller ladders or scaffolding.
  • Linear feet. Total length matters most. Measure every eave, including garages and porches.

Fascia and soffit replacement cost by type

MaterialFascia, per linear foot (Angi)Soffit, per linear foot (Angi)Notes
Wood$1–$3$5–$17Cheapest; needs paint and can rot
PVC$3–$7$7–$20 (vinyl/PVC)Won't rot; limited colors
Vinyl$5–$9$7–$20 (vinyl/PVC)Low upkeep; can crack in cold
Aluminum$8–$20$9–$30Durable; often wrapped over wood
CompositeNot listed$5–$25Wood look, less upkeep

Angi's fascia figures are its "average cost per linear foot" by material and are lower than its installed range, so treat them as the material part of the price. This Old House publishes the same material ranges.

How to check a fascia and soffit quote

  • Linear feet in writing. The quote should state how many feet of fascia and soffit, not just a lump sum.
  • Material and color. Name the product, thickness and finish.
  • Rot allowance. Ask how hidden rot in rafter tails or decking will be priced if it's found.
  • Gutters. Confirm who takes gutters down, rehangs them, and whether that's included.
  • Ventilation. If the soffit is vented, check the vented area works with the attic's ridge or roof vents.
  • Drip edge. Ask whether the roof edge metal will be checked or replaced, since failed drip edge often causes the rot.

Repair or replace?

Spot-repair a short rotted section when the rest of the boards are sound; HomeGuide's repair figures cover that. Replace the run when rot shows up in several places, paint won't hold, or you're replacing gutters or the roof anyway. Wrapping sound wood fascia in aluminum is a lower-cost middle option, but don't wrap over rot: it hides the damage and keeps it wet.

Fascia work with gutters and a new roof

Fascia sits between the roof and the gutters, so it's easiest to fix while one of them is off. Gutters hang from the fascia, and a roof replacement adds new drip edge at the same edge. Plan fascia repairs with gutter replacement or a new roof, and check for roof decking damage behind any soft boards. Our roof replacement calculator doesn't include fascia or soffit work, so add it as a separate line.

Sources and limits

SourceWhat it gave usDate
HomeGuide, soffit and fascia replacement costInstalled fascia and soffit ranges, whole-house totals, painting, capping, repairNo date shown; checked November 17, 2026
Angi, fascia costInstalled range and average, totals by length, material prices2026; checked November 17, 2026
Angi, soffit replacement costAverage, range, per-foot and labor prices, removal, materialsLabeled 2025 data; checked November 17, 2026
This Old House, fascia board replacement costMaterial prices, old fascia removalChecked November 17, 2026
Fixr, roof repair costSoffit and fascia repair range2026 data; checked November 17, 2026

These are national planning ranges, not quotes, and they aren't part of our roof replacement model.

The next step

Get your number in 60 seconds.

Answer a few quick questions and get an itemized 2026 estimate for your roof. No email, no sales calls.

Open the Roof Cost Calculator →

Based on 2026 public cost data. See the methodology.

FAQ

How much does fascia replacement cost per foot?

Installed fascia replacement typically costs about $5–$22 per linear foot. HomeGuide puts it at $5–$12 and Angi at $7–$22, with Angi's average near $14.60 per foot. Wood is the cheapest material and aluminum the most expensive; rotted rafter tails or decking found behind the board add to the bill.

Should fascia be replaced with gutters?

Usually, yes, when the fascia is soft or rotted. Gutters hang from the fascia, so it has to be sound before new gutters go up, and replacing both at once means taking the gutters down only once. If the fascia is solid, new gutters can go on the existing boards.

What's the difference between fascia and soffit?

Fascia is the vertical board along the roof edge, where gutters attach. Soffit is the horizontal panel on the underside of the overhang, between the fascia and the wall. Vented soffit lets air into the attic, which is part of the roof's ventilation system.

Cost figures are planning estimates based on 2026 public data (Homewyse, Angi, Fixr, BLS). They are not contractor quotes. Full disclaimer · How we calculate.