Tacoma roof replacement cost in 2026
A roof replacement in Tacoma costs about $15,100–$20,000 for a 2,000 sq ft home with architectural shingles in our 2026 model, with one layer torn off, permits and a decking allowance. The same estimate applies across Federal Way, Lakewood and the rest of the South Sound, because the model uses Washington's statewide 1.09 labor factor and does not separate Pierce County from King County.
What moves the price in Tacoma and the South Sound
Tacoma's permit exemption. The city's residential permit page lists reroofing of single-family and duplex homes among work that does not need a residential permit, provided the existing roof coverings come off first and the new roofing meets the listed conditions, including a weight limit of 2.5 pounds per square foot. Overlays are different: Tacoma offers a Residential Roof Overlay permit for roofing laid over an existing layer. In practice, a full tear-off can be cheaper to schedule than an overlay in Tacoma, because it skips the overlay permit. Heavier coverings such as tile or slate fall outside the weight condition, so check before you switch materials.
Lakewood and Federal Way have their own rules. Lakewood's permit guide says residential re-roofing over 2,100 square feet needs a permit, as do recovers when two or more layers are already on the house. Federal Way processes permits through MyBuildingPermit.com, the King County portal that publishes which projects each member city exempts. Puyallup issues re-roof permits through its own portal.
Torch-down and flat roofs. Tacoma's fire department requires an annual roofing operations permit for contractors using open-flame torch-down, hot tar tank trucks or tar kettles. If you have a low-slope section, ask the contractor for that permit, or price a cold-applied system instead with our flat roof cost calculator.
Moss and wet winters. Western Washington's damp, shaded roofs grow moss that shortens shingle life; our Washington roof cost guide covers moss control and the contractor disclosure statement state law requires before most reroofs.
Tacoma roof cost by material
| Roof covering | Installed $/sq ft (model) | 2,000 sq ft home, Washington labor |
|---|---|---|
| 3-Tab Asphalt Shingles | $4.00–$6.00 | $11,900–$17,800 |
| Architectural Asphalt Shingles | $5.21–$6.82 | $15,100–$20,000 |
| Class 4 Impact-Resistant Shingles | $6.50–$9.50 | $18,600–$27,200 |
| Corrugated Metal | $5.00–$10.00 | $14,800–$29,300 |
| Standing Seam Metal | $10.00–$16.00 | $28,200–$45,400 |
| Stone-Coated Steel | $8.00–$14.00 | $22,900–$40,000 |
| Clay Tile | $12.00–$18.00 | $33,800–$51,000 |
| Concrete Tile | $10.00–$16.00 | $28,500–$45,600 |
| Natural Slate | $15.00–$28.00 | $41,900–$77,900 |
| Wood Shake | $8.00–$14.00 | $23,000–$40,100 |
| TPO / EPDM Flat Membrane | $8.23–$10.54 | $23,200–$30,200 |
Example estimates by home size
| Home footprint | Roof area | Architectural shingles | Standing seam metal |
|---|---|---|---|
| 1,500 sq ft | 1,680 sq ft | $11,400–$15,200 | $21,200–$34,200 |
| 2,000 sq ft | 2,240 sq ft | $15,100–$20,000 | $28,200–$45,400 |
| 2,500 sq ft | 2,800 sq ft | $18,800–$24,900 | $35,200–$56,600 |
Examples assume one story, medium pitch, a simple gable, one layer removed, permits and a 10% decking allowance at Washington labor rates.
Price your Tacoma roof
Calculator
Tacoma roof cost calculator
Preset to Washington’s labor factor (1.09×) and a 2,000 sq ft home (2,240 sq ft of roof). Change any input; the link in your address bar saves it.
Material
Model rate: $5.21–$6.82 per roof sq ft installed.
Roof area
Roof surface, not floor area. One roofing square = 100 sq ft. 2,240 sq ft = 22.4 squares.
Roof pitch
Steeper roofs take more labor and safety setup.
Complexity
Stories
Old layers to tear off
Tear-off: $39–$53 per square per layer.
Location
State labor factor from BLS roofer wages. ZIP is optional and never stored.
Extras (optional)
Itemized planning estimate
Your roof bill
Washington · 2,240 sq ft roof
Estimated installed total · Architectural Asphalt Shingles
$15.1k–$20.0k$680–$890 per roofing square, all in. Planning life 25–30 years.
Not included: gutters, structural repairs beyond decking, and local permit fees.
Planning estimate only, not a contractor quote. Actual cost depends on roof condition, local requirements, and the work included.
Towns and areas covered
Pierce County (Tacoma, Lakewood, University Place, Puyallup, Fife, Spanaway, Gig Harbor) and south King County (Federal Way, Auburn, Kent, Des Moines). For other states, see costs by state.
Sources: TheRoofBill 2026 cost model (methodology); City of Tacoma residential permit and ePermit pages; Tacoma Fire Department permit #2003.2; City of Lakewood permit guide; MyBuildingPermit.com; City of Puyallup. Checked November 2026.
Frequently asked questions
What is the roof replacement cost in Tacoma in 2026?
TheRoofBill's 2026 model puts a 2,000 sq ft Tacoma home with architectural shingles at $16,800–$22,200, with one layer of tear-off, permits and a decking allowance. A 1,500 sq ft home models at $12,700–$16,800 and a 2,500 sq ft home at $20,900–$27,600.
What does a new roof cost in Federal Way in 2026?
Federal Way uses the same Washington labor factor (1.09) in our model, so a 2,000 sq ft home with architectural shingles comes to about $15,100–$20,000. Federal Way handles permits through the regional MyBuildingPermit.com portal.
Do I need a permit to replace my roof in Tacoma?
Often not. Tacoma exempts reroofing of single-family homes and duplexes when the old roofing is removed first and the new roofing meets the city's conditions, such as weighing no more than 2.5 pounds per square foot. Laying new roofing over an existing layer needs a Residential Roof Overlay permit.
Does torch-down roofing need a fire permit in Tacoma?
The Tacoma Fire Department requires an annual roofing operations permit for contractors using open-flame torch-down, hot tar tank trucks or tar kettles. Ask a flat-roof contractor to show theirs.
Is a roof cheaper in Tacoma than in Seattle?
Not in our model, which uses one Washington labor factor for the whole state. Permit rules do differ by city, so ask each bidder whether a permit fee is included and who applies for it.
Cost figures are planning estimates based on 2026 public data (Homewyse, Angi, Fixr, BLS). They are not contractor quotes. Full disclaimer · How we calculate.