Fort Washington, Pennsylvania (not Washington State)
This page covers Fort Washington in Montgomery County, Pennsylvania, and the surrounding Philadelphia suburbs. For Washington State, see our Washington roof replacement cost guide.
Roof replacement cost in Bucks County and the Philadelphia suburbs
A new roof in Bucks, Montgomery, Chester or Delaware County costs about $14,100–$18,700 for a 2,000 sq ft home with architectural shingles in our 2026 model, with one layer torn off, permits and a decking allowance. A 1,500 sq ft house models at $10,600–$14,100, a 2,500 sq ft house at $17,500–$23,200. The model uses Pennsylvania's statewide labor factor of 1.01; it has no separate factor for the collar counties, so expect local bids to show the spread.
Roof replacement cost breakdown
For that 2,000 sq ft example, the bill splits roughly like this in the model: materials and installation about 83%, tear-off about 6%, permits and disposal about 2%, and a decking contingency about 8% for rotten boards found once the old roof is off. The calculator below itemizes the same lines for your roof. If a bid lumps everything into one number, ask for those lines; our roofing estimate red flags show what to look for.
Township permit rules and fees
Pennsylvania's Uniform Construction Code is enforced by each municipality, so permit rules for a reroof change at the township line:
- Upper Dublin Township (Fort Washington, Dresher, Maple Glen): issues a roofing permit online. The fee is $25 for the first $1,000 of estimated cost plus $10 for each additional $1,000, plus a $4.50 UCC fee. On a $17,000 roof that works out to $189.50. Every contractor must also be on file with the township with insurance certificates.
- Lower Gwynedd Township: a $100 residential re-roofing permit, required only if sheathing is replaced.
- East Rockhill Township (Bucks): a roofing permit when more than 25% of the roof is replaced.
- Nockamixon Township (Bucks): nonstructural reroofs go through a re-roofing permit application to the zoning officer; structural work needs a building permit.
Statewide rules, including contractor registration with the Attorney General and contract requirements, are in our Pennsylvania roof cost guide.
Slate and complex roofs
If your house has a slate roof, or a roofline with dormers, valleys and turrets, the estimate changes a lot. Slate needs a specialist and prices far above shingles; see our slate roof cost calculator, or synthetic slate if you want the look for less. A complex roof also adds 28% to the installed rate in our model. Ask the township whether your street sits in a historic district before changing materials.
Philadelphia suburbs roof cost by material
| Roof covering | Installed $/sq ft (model) | 2,000 sq ft home, Pennsylvania labor |
|---|---|---|
| 3-Tab Asphalt Shingles | $4.00–$6.00 | $11,100–$16,600 |
| Architectural Asphalt Shingles | $5.21–$6.82 | $14,100–$18,700 |
| Class 4 Impact-Resistant Shingles | $6.50–$9.50 | $17,300–$25,400 |
| Corrugated Metal | $5.00–$10.00 | $13,800–$27,300 |
| Standing Seam Metal | $10.00–$16.00 | $26,300–$42,300 |
| Stone-Coated Steel | $8.00–$14.00 | $21,300–$37,300 |
| Clay Tile | $12.00–$18.00 | $31,500–$47,500 |
| Concrete Tile | $10.00–$16.00 | $26,500–$42,500 |
| Natural Slate | $15.00–$28.00 | $38,900–$72,300 |
| Wood Shake | $8.00–$14.00 | $21,400–$37,400 |
| TPO / EPDM Flat Membrane | $8.23–$10.54 | $21,600–$28,100 |
Example estimates by home size
| Home footprint | Roof area | Architectural shingles | Standing seam metal |
|---|---|---|---|
| 1,500 sq ft | 1,680 sq ft | $10,600–$14,100 | $19,800–$31,800 |
| 2,000 sq ft | 2,240 sq ft | $14,100–$18,700 | $26,300–$42,300 |
| 2,500 sq ft | 2,800 sq ft | $17,500–$23,200 | $32,800–$52,700 |
Examples assume one story, medium pitch, a simple gable, one layer removed, permits and a 10% decking allowance at Pennsylvania labor rates.
Price your roof in Bucks, Montgomery, Chester or Delaware County
Calculator
Philadelphia suburbs roof cost calculator
Preset to Pennsylvania’s labor factor (1.01×) and a 2,000 sq ft home (2,240 sq ft of roof). Change any input; the link in your address bar saves it.
Material
Model rate: $5.21–$6.82 per roof sq ft installed.
Roof area
Roof surface, not floor area. One roofing square = 100 sq ft. 2,240 sq ft = 22.4 squares.
Roof pitch
Steeper roofs take more labor and safety setup.
Complexity
Stories
Old layers to tear off
Tear-off: $39–$53 per square per layer.
Location
State labor factor from BLS roofer wages. ZIP is optional and never stored.
Extras (optional)
Itemized planning estimate
Your roof bill
Pennsylvania · 2,240 sq ft roof
Estimated installed total · Architectural Asphalt Shingles
$14.1k–$18.7k$630–$830 per roofing square, all in. Planning life 25–30 years.
Not included: gutters, structural repairs beyond decking, and local permit fees.
Planning estimate only, not a contractor quote. Actual cost depends on roof condition, local requirements, and the work included.
Towns and areas covered
Montgomery County (Fort Washington, Ambler, Blue Bell, Lansdale, King of Prussia, Lower Gwynedd), Bucks County (Doylestown, Newtown, Yardley, Warminster, Quakertown), Chester County (West Chester, Malvern, Phoenixville, Exton) and Delaware County (Media, Springfield, Radnor). For other states, see costs by state.
Sources: TheRoofBill 2026 cost model (methodology); Upper Dublin Township code and permit documents; Lower Gwynedd Township fee schedule; East Rockhill and Nockamixon township permit pages. Checked November 2026.
Frequently asked questions
What is the roof replacement cost in Bucks County, PA?
TheRoofBill's 2026 model puts a 2,000 sq ft Bucks County home with architectural shingles at $15,000–$19,900, with one layer of tear-off, permits and a decking allowance. Standing seam metal on the same house models at $28,000–$45,000.
What are roof replacement costs in Fort Washington, PA?
Fort Washington, Pennsylvania (Montgomery County, not Washington State) uses Pennsylvania's labor factor in our model: about $14,100–$18,700 for a 2,000 sq ft home with architectural shingles. Upper Dublin Township, whose offices are in Fort Washington, charges a roofing permit fee of $25 for the first $1,000 of cost plus $10 per additional $1,000, plus a $4.50 state UCC fee.
What is the roof replacement cost breakdown in Bucks County?
For a 2,000 sq ft home with architectural shingles, about 83% of the estimate is materials and installation, 6% tear-off, 2% permits and disposal and 8% a decking contingency in our model. The calculator on this page shows each line for your roof.
Do I need a permit to replace a roof in the Philadelphia suburbs?
It depends on the township. Upper Dublin lists a roofing permit; Lower Gwynedd requires a $100 residential re-roofing permit only when sheathing is replaced; East Rockhill requires a roofing permit when more than 25% of the roof is replaced. Call your township before you sign.
Do roofers need to be registered in Pennsylvania?
Yes. Contractors doing home improvement work in Pennsylvania register with the Attorney General, and many townships also keep their own contractor registration with proof of insurance. Upper Dublin, for example, requires every contractor to be on file with the township.
Cost figures are planning estimates based on 2026 public data (Homewyse, Angi, Fixr, BLS). They are not contractor quotes. Full disclaimer · How we calculate.