Cost Guides · 2026

Townhouse Roof Replacement Cost (2026): Unit vs Building

A townhouse roof runs about $6,000–$8,000 for an 800 sq ft unit footprint in our 2026 model. Who pays, shared-wall code rules and per-unit math.

$6,000–$8,000

Short answer

A townhouse roof runs about $6,000–$8,000 for an 800 sq ft unit footprint in our 2026 model. Who pays, shared-wall code rules and per-unit math.

Calculator

Roof cost calculator

Preset to the national labor baseline and a 2,000 sq ft home (2,240 sq ft of roof). Change any input for an itemized 2026 estimate. The link in your address bar saves your inputs.

01

Material

Model rate: $5.21–$6.82 per roof sq ft installed.

02

Roof area

Area unit

Roof surface, not floor area. One roofing square = 100 sq ft. 2,240 sq ft = 22.4 squares.

03

Roof pitch

Steeper roofs take more labor and safety setup.

04

Complexity

05

Stories

06

Old layers to tear off

Tear-off: $39–$53 per square per layer.

07

Location

State labor factor from BLS roofer wages. ZIP is optional and never stored.

+

Extras (optional)

Itemized planning estimate

Your roof bill

National baseline · 2,240 sq ft roof

Planning estimate
Materials & installation2,240 sq ft × $5.21–$6.82 × 1.00 adjustments$11,670–$15,280
Tear-off22.4 squares × $39–$53 × 1 layer$870–$1,190
Permits & disposalModel default, scaled to 1.6× at the high end$300–$480
Decking contingency10% of base, for damaged decking found mid-job$1,160–$1,530

Estimated installed total · Architectural Asphalt Shingles

$14.0k–$18.5k
Low$14,000
Typical (midpoint)$16,200
High$18,500

$630–$820 per roofing square, all in. Planning life 25–30 years.

Not included: gutters and structural repairs beyond decking.

Planning estimate only, not a contractor quote. Actual cost depends on roof condition, local requirements, and the work included.

Townhouse roof replacement cost: the short answer

In TheRoofBill's 2026 national baseline example, replacing the roof over a single two-story townhouse with an 800 sq ft footprint costs about $6,000–$8,000 with architectural shingles. A smaller 600 sq ft footprint runs about $4,600–$6,100; a 1,000 sq ft footprint about $7,500–$9,900.

The short answer

Before price, settle who is responsible: your HOA or you. Then make sure the roofer prices the shared-wall details: the flashing and fire-separation zone where your roof meets your neighbor's.

Figures come from TheRoofBill's published cost model: the architectural shingle installed rate, a 1.12 slope factor for a medium (about 6/12) pitch, a simple gable, the national baseline labor factor of 1.00, the model's 5% access factor for two stories (10% for three), one layer removed, the $300–$480 permit and disposal allowance and a 10% decking contingency. The footprints are examples; measure yours.

Townhouse roof cost by unit footprint

A townhouse roof covers the footprint, not the living area. A 1,600 sq ft two-story unit typically sits on about an 800 sq ft footprint.

Unit footprintRoof area (squares)Two storiesThree stories
600 sq ftAbout 672 sq ft (6.7)$4,600–$6,100$4,800–$6,400
800 sq ftAbout 896 sq ft (9.0)$6,000–$8,000$6,300–$8,300
1,000 sq ftAbout 1,120 sq ft (11.2)$7,500–$9,900$7,800–$10,300

Architectural shingles, medium pitch, simple gable, one layer removed, national baseline. Many urban townhouses have flat or low-slope roofs; an 800 sq ft three-story unit with a TPO membrane comes to about $8,900–$11,600 in the same model. See flat roof replacement cost.

Who pays: owner, HOA or both

Roof responsibility in a townhouse community is set by the declaration and bylaws, not by a general rule. Common arrangements:

ArrangementWho hires the rooferHow it's paid
HOA maintains all roofsThe associationReserve fund, or a special assessment if reserves fall short
Each owner maintains the roof over their unitYouOut of pocket or insurance claim; HOA may set color and material rules
Mixed: owner pays, HOA approvesYou, after HOA approvalOut of pocket, to the HOA's specification

Ask the board in writing which applies, whether the association's reserve study schedules your building's roof, and whether there's an approved material and color list. If storm damage is involved, check whether the HOA's master policy or your own policy responds first; our ACV vs RCV coverage guide explains the payout types.

One unit vs the whole building

Replacing one unit's roof leaves a seam where new shingles meet a neighbor's older roof. Doing the whole building at once avoids it. In the model, four 800 sq ft units compare like this:

ApproachTotalPer unit
Four separate jobs$24,200–$32,100$6,000–$8,000
One building-wide job (3,200 sq ft footprint)$23,300–$30,600$5,800–$7,700

The model's difference is mostly one permit and disposal allowance instead of four. Real building-wide bids may differ further through crew scheduling and staging; we don't have a source that measures that, so it isn't in the table.

Shared-wall rules a reroof must respect

Townhouse units are separated by fire-resistance-rated walls, and the roof at those walls has its own rules. Under IRC R302.2, as Kansas City's townhouse separation guidance summarizes, a parapet is not required when:

  • the roof covering is at least Class C,
  • fire-retardant-treated or noncombustible sheathing (or Type X gypsum board under the deck) extends 4 feet on each side of the common wall, and
  • no openings or penetrations are within 4 feet of the wall.

For a reroof, that means:

  1. Keep new vents, skylights and ridge vent runs out of the 4-foot zone on each side of the common wall.
  2. If damaged decking in that zone is replaced, it has to be like-for-like fire-rated material, not ordinary plywood or OSB.
  3. Where a parapet exists, its cap and the flashing where the roof meets it are part of the job.

Your local code edition governs, so ask the roofer to confirm the separation details with the permit.

What to ask on a townhouse roof quote

  • Who carries the permit, and whether HOA approval is attached.
  • How the edge at each neighbor's roof will be finished, and who warrants that seam.
  • Fire-rated decking price per sheet for the zone at the common walls.
  • How neighbors' gutters, parking and access will be protected during the job.
  • Disposal and staging plan for a tight lot.

Compare bids line by line with our roofing estimate red flags. For the effect of house size on a detached home, see roof replacement cost by house size.

The next step

Get your number in 60 seconds.

Answer a few quick questions and get an itemized 2026 estimate for your roof. No email, no sales calls.

Open the Roof Cost Calculator →

Based on 2026 public cost data. See the methodology.

Sources and estimate date

Figures calculated November 15, 2026 from TheRoofBill's published cost model. Code reference checked the same day: City of Kansas City, Missouri, fire walls, dwelling unit and townhouse separation guidance (IRC R302.2).

More project costs are in our 2026 roof cost guides.

The next step

Get your number in 60 seconds.

Answer a few quick questions and get an itemized 2026 estimate for your roof. No email, no sales calls.

Open the Roof Cost Calculator →

Based on 2026 public cost data. See the methodology.

Frequently asked questions

How much does it cost to replace a townhouse roof?

In TheRoofBill's 2026 national baseline example, a two-story townhouse with an 800 sq ft footprint and architectural shingles costs about $6,000–$8,000 (medium pitch, simple gable, one layer removed). A 600 sq ft footprint comes to about $4,600–$6,100 and a 1,000 sq ft footprint about $7,500–$9,900. Shared-wall details and HOA requirements can add to that.

Who pays for a townhouse roof, the owner or the HOA?

It depends on your community's governing documents. Some associations own and maintain roofs and fund them from reserves or a special assessment; in others each owner is responsible for the roof over their own unit. Read your declaration and ask the board in writing before you hire anyone.

Is it cheaper to replace all the townhouse roofs at once?

Somewhat, in TheRoofBill's model: four 800 sq ft units come to about $24,200–$32,100 as four separate jobs and $23,300–$30,600 as one building-wide job, mostly because there is one permit and disposal allowance instead of four. Doing the whole building also avoids seams and color mismatches where one unit's new roof meets a neighbor's old one.

Are there special code rules for townhouse roofs?

Yes, at the walls between units. Under IRC R302.2, as Kansas City's building guidance summarizes, a parapet can be omitted only when the roof has at least a Class C covering, fire-resistant sheathing extends 4 feet on each side of the common wall, and there are no roof openings within 4 feet of it. A reroof should not cut new vents or skylights into that zone.

Cost figures are planning estimates based on 2026 public data (Homewyse, Angi, Fixr, BLS). They are not contractor quotes. Full disclaimer · How we calculate.