Costs by State · 2026

Roof Replacement Cost in Virginia (2026)

Virginia roof replacement in 2026: about $12,300–$16,300 in our 2,000 sq ft asphalt example, plus DPOR licensing, permits and the 2027 roofing contract law.

Ranked #35 of 51 in the TheRoofBill Roof Replacement Cost Index

Modeled planning range$12.3k–$16.3k
Example roof area2,240 sq ft
State labor factor0.87×

Calculator

Roof cost calculator

Preset to Virginia’s labor factor (0.87×) and a 2,000 sq ft home (2,240 sq ft of roof). Change any input for an itemized 2026 estimate. The link in your address bar saves your inputs.

01

Material

Model rate: $5.21–$6.82 per roof sq ft installed.

02

Roof area

Area unit

Roof surface, not floor area. One roofing square = 100 sq ft. 2,240 sq ft = 22.4 squares.

03

Roof pitch

Steeper roofs take more labor and safety setup.

04

Complexity

05

Stories

06

Old layers to tear off

Tear-off: $39–$53 per square per layer.

07

Location

State labor factor from BLS roofer wages. ZIP is optional and never stored.

+

Extras (optional)

Itemized planning estimate

Your roof bill

Virginia · 2,240 sq ft roof

Planning estimate
Materials & installation2,240 sq ft × $5.21–$6.82 × 0.87 adjustments$10,150–$13,300
Tear-off22.4 squares × $39–$53 × 1 layer$870–$1,190
Permits & disposalModel default, scaled to 1.6× at the high end$300–$480
Decking contingency10% of base, for damaged decking found mid-job$1,010–$1,330

Estimated installed total · Architectural Asphalt Shingles

$12.3k–$16.3k
Low$12,300
Typical (midpoint)$14,300
High$16,300

$550–$730 per roofing square, all in. Planning life 25–30 years.

Not included: gutters and structural repairs beyond decking.

Planning estimate only, not a contractor quote. Actual cost depends on roof condition, local requirements, and the work included.

How much does a new roof cost in Virginia in 2026?

TheRoofBill's 2026 model puts an architectural shingle replacement at $12,300–$16,300 for a one-story Virginia house with a 2,000 sq ft footprint, a medium pitch, a simple gable roof and one layer of old shingles torn off. That is roughly 12% below the national version of the same job ($14,000–$18,500). It is a model output, not an average of Virginia contracts or a price any roofer has promised.

Size and shape move the number more than the state does. The same footprint as a two-story home with a steep hip roof models at $19,500–$25,800.

Home footprintRoof areaArchitectural shinglesStanding seam metal
1,500 sq ft1,680 sq ft$9,300–$12,400$17,200–$27,700
2,000 sq ft2,240 sq ft$12,300–$16,300$22,800–$36,700
2,500 sq ft2,800 sq ft$15,300–$20,300$28,400–$45,800

What drives Virginia roof prices

The model applies a Virginia labor factor of 0.87×. It comes from the Bureau of Labor Statistics Occupational Employment and Wage Statistics: in May 2025 the median hourly wage for Virginia roofers was $23.28, against $26.65 nationally. That makes Virginia the 35th most expensive of 50 states and DC in our roof replacement cost by state study.

One statewide factor cannot separate Northern Virginia from Hampton Roads or the Shenandoah Valley, and it tracks wages rather than overhead, insurance or how busy crews are after a storm. The formula and its limits are in our methodology.

Cost by roofing material in Virginia

The table keeps the standard Virginia house and changes only the roof covering.

Roof coveringInstalled $/sq ft (model)2,000 sq ft home, Virginia labor
3-Tab Asphalt Shingles$4.00–$6.00$9,700–$14,600
Architectural Asphalt Shingles$5.21–$6.82$12,300–$16,300
Class 4 Impact-Resistant Shingles$6.50–$9.50$15,100–$22,100
Corrugated Metal$5.00–$10.00$12,100–$23,900
Standing Seam Metal$10.00–$16.00$22,800–$36,700
Stone-Coated Steel$8.00–$14.00$18,500–$32,400
Clay Tile$12.00–$18.00$27,300–$41,200
Concrete Tile$10.00–$16.00$23,000–$37,000
Natural Slate$15.00–$28.00$33,700–$62,700
Wood Shake$8.00–$14.00$18,600–$32,600
TPO / EPDM Flat Membrane$8.23–$10.54$18,800–$24,500

Who can roof your house in Virginia

Virginia licenses contractors through the Department of Professional and Occupational Regulation (DPOR) Board for Contractors. A license is required once a project is worth more than $1,000, which covers virtually every reroof. Licenses come in classes A, B and C, each with a limit on the size of a single contract, and roofing work carries its own specialty designation.

Two checks before you sign: look the company up in DPOR's license lookup and confirm the license is active, and confirm the class covers your contract amount. A contractor quoting a full replacement under a class whose limit is lower than the job is a warning sign. Our roofing contractor hiring checklist covers insurance certificates and references.

Virginia's roofing contract law, starting January 1, 2027

Virginia passed new rules for roofing work tied to insurance claims in 2026. Under Code of Virginia section 59.1-618, effective January 1, 2027:

  • No deductible deals. A contractor may not knowingly or willfully pay, waive or rebate all or part of an insurance deductible for repairs to an owner-occupied home, or offer a rebate, gift or waiver in exchange for a roof inspection or an insurance claim.
  • A required contract notice. Roofing contracts must include a bold-type notice, in at least 14-point font, about the homeowner's responsibility for the deductible and the ban on contractors acting as unlicensed public adjusters.
  • A way out if the notice is missing. If a contractor leaves the notice out, the homeowner can void the contract within 10 days after signing.

A companion section, 59.1-619, adds a right to cancel certain roofing contracts signed in an area under a governor's declared state of emergency. Violations are enforceable under the Virginia Consumer Protection Act. Until 2027, the same advice applies anyway: be wary of anyone offering to "cover" your deductible, and call your insurer before letting a door-to-door company inspect the roof. Our hail damage roof claim guide walks through the order of steps.

Permits and local rules

Virginia uses one statewide building code, the Uniform Statewide Building Code, enforced by your county or city building department. Section 108.2 of the code lists work exempt from a permit, and localities apply it to roofing in different ways. Albemarle County, for example, lists repair or replacement of 100 square feet or less of roof covering on a one- or two-family home as ordinary maintenance. In a locally designated historic district, the building official can require a permit for replacement roofing, siding and windows.

The practical answer: call your building department with your address before the job starts, and write into the contract who is responsible for any permit and inspection. If your home is in a historic district, ask the local review board about material changes, such as slate to asphalt, before you price them.

Questions to ask a Virginia roofer before you sign

  • What is your DPOR license number and class, and does the class cover this contract amount?
  • Does the license carry the roofing specialty?
  • Who is responsible for any permit and inspection at my address?
  • If this job is tied to an insurance claim, where is the deductible and public-adjusting notice in the contract?
  • How is replacement decking priced if you find damage after tear-off?

How to use these numbers

Treat $12,300–$16,300 as the starting point for the standard house, then model your own roof in the roof replacement cost calculator with Virginia selected. Get at least three written bids on the same scope, check each DPOR license and class, and confirm tear-off, underlayment, ventilation and permit responsibility are written into every contract. Compare Virginia with every other state in our state cost study.

Figures are TheRoofBill 2026 model outputs: national installed material rates, a Virginia labor factor of 0.87× from BLS May 2025 roofer wages, tear-off at $39–$53 per square, a $300–$480 permit and disposal allowance and a 10% decking contingency. They are planning estimates, not contractor quotes.

For nearby markets, see roof replacement cost in West Virginia and roof replacement cost in the District of Columbia.

The next step

Get your number in 60 seconds.

Answer a few quick questions and get an itemized 2026 estimate for your roof. No email, no sales calls.

Open the Roof Cost Calculator →

Based on 2026 public cost data. See the methodology.

Frequently asked questions

How much does a roof replacement cost in Virginia in 2026?

TheRoofBill's 2026 model estimates about $12,300–$16,300 for a one-story Virginia home with a 2,000 sq ft footprint, medium pitch, simple gable, architectural asphalt shingles and one layer of tear-off. The same footprint as a two-story house with a steep hip roof comes out around $19,500–$25,800. These are planning estimates, not quotes or a statewide average.

Do roofers need a license in Virginia?

Yes, for most jobs. Virginia's Department of Professional and Occupational Regulation (DPOR) requires a contractor license for any project valued at more than $1,000, and roofing has its own specialty designation. The license class depends on the size of the job, so check that the class covers your contract amount.

What does Virginia's new roofing contract law change?

Starting January 1, 2027, Virginia law bars contractors from paying, waiving or rebating a homeowner's insurance deductible on an owner-occupied home and requires a bold-type notice in roofing contracts about deductibles and claim adjusting. If the notice is missing, the homeowner can void the contract within 10 days after signing.

Do I need a permit to replace a roof in Virginia?

It depends on the locality and the work. Virginia's statewide building code lists work exempt from permits, and local building departments apply it; in a locally designated historic district, the building official can require a permit for replacement roofing. Ask your county or city building department before work starts.

How does the model set Virginia's labor cost?

Labor, in our model. The Bureau of Labor Statistics puts the median Virginia roofer wage at $23.28 an hour (May 2025), so the model's Virginia labor factor is 0.87. Materials, tear-off and permits are priced the same nationally.

Cost figures are planning estimates based on 2026 public data (Homewyse, Angi, Fixr, BLS). They are not contractor quotes. Full disclaimer · How we calculate.